Amiga.org

Operating System Specific Discussions => Amiga OS => Amiga OS 4.x (future) Hardware Compatibility Discussions => Topic started by: klx300r on August 05, 2009, 05:26:09 AM

Title: TV tuner cards with Sam flex and OS4.1?
Post by: klx300r on August 05, 2009, 05:26:09 AM
well i guess I'll start off this section!..anyone here try a TV tuner card on a Samflex system running OS4.1 yet? what type of cards work with Sam? I'm hoping to get my basic cable running through my Sam soon hopefully
Title: Re: TV tuner cards with Sam flex and OS4.1?
Post by: spirantho on August 05, 2009, 08:59:26 AM
If your TV card is using the Conexant CX2388x chipset, then you should be fine (does the Flex require 3.3V like the 440ep? If so make sure your card supports 3.3V.).

Connect the video from the cable box into the video in on the TV card, connect the audio from the cable box to the line-in on the Sam, and you should be good to go.
Title: Re: TV tuner cards with Sam flex and OS4.1?
Post by: A1260 on August 05, 2009, 10:14:02 AM
just put it in the third plug from the left and it should work
Title: Re: TV tuner cards with Sam flex and OS4.1?
Post by: klx300r on August 06, 2009, 03:08:23 PM
thanks for the replys guys! I'll try it out once I get the system up & running...