Odd that the ONLY thing that worked to me was to use the setup from IDEFix97 on my A1200 I am restoring. Tried AtapiMagic, tried AmiCDFS and just a plain old mountlist for CD0, 1, 2, 3, 4, 5 and on. I have three different brand CD rom drives that work. If I use IDEFix, they all work just fine, any other method the system 'sees' the hardware and I can pull up the device ID and information, even open and close the trays, but will not put icons on the Workbench under 3.2 for some reason nor can I access them via CLI or other means.
*Forgot to mention, I have tried using the IDE connection and now am using the Blizzard PPC connection. Using IDE, I use SCSI.device. Using SCIS, I am using Blizzppc.device. BOTH exhibit same issues with all three drives but they work on other systems under different OS versions so I know drives are fine.. just missing something I take it with 3.2 and the differences.
The other issue I am still trying to figure out as well, is why internal CD drives will not open the tray properly every time. Sometimes it acts like it is stuck closed with a clicking sound, cycles a few times and then sometimes finally opens, most of the time does not. I can open all three drives manually using the pinhole but obviously that is not what I want to do.
Anyone have any ideas or suggestions on this?