A3000D Dead Power Supply

[Erol]

Does anyone know if these can be repaired?
ive seen a few threads on replacing with a PC power supply.

[Erol]

3000D is super easy. http://amigakit.leamancomputing.com/catalog/product_info.php?products_id=1164

I wish they would make one of these adapters for my 3000T

I was considering that route with AmigaKit ATX adaptor, but which ATX power supply size wise will fit the Amiga?  Mini ATX?   and what about the power switch?

[Erol]

This is the thread you're looking for.

http://www.amiga.org/forums/showthread.php?t=68541

BTW, it worked like a charm!

Thank you all for your help.

I will certainly look at using an miniatx power supply.   seems the most wise solution.  Big Thank you!

[Erol]

Well I got A3000D  up and running.  thanks for all that helped, and the TICK advice was very helpfull.
I've even managed to install a nice new battery and clean the motherboard with some pcb cleaner.  Once I have the powers supply installed I may upload more pics.

Next job repairing A2000 from a leaked battery..  luckily i think she is repairable.

[Erol]

must be my lucky day,  changed the fuse inside the original power supply 1amp and its now working..      I now stuck on to use original or use AtX duel voltage power supply.

[Erol]

@Erol,

If you have the know how change out the old capacitors in there. Will last forever.

Chris

Thanks Chris will do..  i just need to buy some.

[Erol]

Id use the original psu until it fails.. as the a3k case is designed for it specifically. Though like i said  a mini itx or micro atx sff psu fits nicely as well but leaves a square hole in the back.

You read my mind,  i will keep atx one as a spare for now.