C64 SD Card Reader

[tone007]

1541U is hard to get a hold of and expensive, though pretty close to 100% compatible with all software.  If you're looking for affordable and readily available, the uIEC/SD is a bargain and works well. http://www.jbrain.net/

[tone007]

Not that it makes much of a difference, but the default device number of the uIEC is generally 10.

[tone007]

Definitely go for the daughterboard, the edge connector is only to take 5V from your C64's user port to power the device.  Personally, I'd do it a different way, but it makes it easy if you don't want to solder.

My solution: http://jungle.net/tone/uiecsd

[tone007]

Looks like all you need is the daughterboard, I think the "13 edge connector" thing is what I have, which is basically just an IEC cable soldered to a connector that goes over the 13 pins.  Can't imagine where the name came from.

The daughterboard has the connector you'd need to put on the cassette port for power.