GVP scsi cards are usually factory set to ID 7
okies, you will probably have to setup the harddrive itself again using the GVP software faaastprep
I'm sure kickstart 1.3 will allow harddrive capacity of sizes upto 1 gigabyte on most gvp bootroms (my memory might be failing me there.. doh!) so how big is your scsi drive?
try this link for the setup software
http://www.amiga-hardware.com/drivers/drivers/SCSI_Controllers/GVPImpactSeriesII.dmssome hints once into the faaastprep
most amiga users have 2 partitions setup.. a smaller boot partition and a larger storage partition. The reason for a small boot partition is for when the volume becomes invalid for whatever reason, a small partition validates itself quicker. Make sure its large enough to install workbench onto, around 50meg is ideal (if your drive is larger than this. lol)
first partition DH0
second partition DH1
thats DHzero
DHone
you need AmigaOS device names.. use the above as a rough standard
once you have setup your partitions, write them to the drive ( small button up along the top right of the faaastprep software says.. "write" this will lock the changes to the drive )
you will now need to "format" the drive with a filesystem, FastFileSystem or FFS is what you should use for kickstart 1.3
Once the drives are formatted (prolly take ages!) you then can install your workbench disks onto the drive and reboot, now you should not have any more crashes unless we have missed something
best of luck