Welcome, Guest. Please login or register.

Author Topic: A member & friend's father (William Frick) just passed away  (Read 2785 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline save2600Topic starter

  • Hero Member
  • *****
  • Join Date: Jul 2006
  • Posts: 3261
  • Country: us
    • Show only replies by save2600
Moderators, please excuse the post in this particular forum. Figured ‘Amiga Community Support’ would be just as good a place as any to post this, taking the forum’s name in the literal sense. Also wanted this to show publicly in the status updates for maximum visibility. If you feel visibility would be just as good, in another more appropriate forum - by all means, please move it then.

Marc Frick’s (user marcfrick2112) father William passed away yesterday, late afternoon. I thought it would be nice to put together somewhat of an online eulogy for him and felt, under the circumstances, we could start a fund of sorts to help him with some of these untimely costs. Details toward the end of this note.

I met Marc sometime back here at Amiga.org and developed an instant rapport. We exchanged e-mails, phone numbers and before too long, started trading Amiga goodies. Living in the same state and “only” an hour-and-a-half away, Marc extended an inviation to come check out his collections - which my girlfriend and I decided to take him up on one afternoon. It was the first and only time we met his father, but that first impression is one that will last forever in our minds. Having been a curator at a local museum for many years, Bill was an interesting man to say the least. We were quickly taken by his honed art of conversation and wealth of knowledge. A polite and charming man with a seemingly endless amount of historical banter to speak about. Despite his health problems, Marc’s father appeared full of life during our visit, even though we knew better, but it did come as a bit of a surprise; that his health took such a serious turn so quickly.

Knowing a little about Marc’s background, modest employment status and living situation, I felt it appropriate to set up a fund where people may want to help out if they can. Economically the times are tough for most all of us, but not as tough potentially as they’re going to be for Marc, who is a sole survivor. No other immediate family to help out during this most awkward time.

I’ve taken the liberty of creating a special PayPal account on Marc’s behalf with a gift already deposited. If you want to just "sign" this virtual sympathy card, that's fine too of course. No pressure here at all to make a donation, but any amount would be appreciated if you are able. PayPal address is: marcandre@earthlink.net.

Thanks for reading  :)
« Last Edit: June 28, 2010, 04:00:06 PM by save2600 »
 

Offline the_leander

  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 3448
    • Show only replies by the_leander
    • http://www.extropia.co.uk/theleander/
Re: A member & friend's father (William Frick) just passed away
« Reply #1 on: June 28, 2010, 04:09:32 PM »
Condolences etc.
Blessed Be,
Alan Fisher - the_leander

[SIGPIC]http://www.extropia.co.uk/theleander/[/SIGPIC]
 

Offline runequester

  • It\'s Amiga time!
  • Hero Member
  • *****
  • Join Date: Oct 2009
  • Posts: 3695
    • Show only replies by runequester
Re: A members father (William Frick) just passed away
« Reply #2 on: June 28, 2010, 04:44:27 PM »
Dont know the guy but feel sad for his loss. Never an easy time for anyone.

Best wishes for the mate
 

Offline outlawal2

Re: A members father (William Frick) just passed away
« Reply #3 on: June 28, 2010, 04:53:39 PM »
As my Father is also my best friend, I feel your pain and you have my deepest sympathy...
I am greatly sorry for your loss...
 

Offline VingtTrois

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: Mar 2009
  • Posts: 897
  • Country: 00
    • Show only replies by VingtTrois
    • http://www.amiga.org/gallery/images/6006/1_2316_My_AMIGA_Collection_Sept2010.jpg
Re: A member & friend's father (William Frick) just passed away
« Reply #4 on: June 28, 2010, 05:12:19 PM »
Condolences  :(

Quote from: save2600;567772
Economically the times are tough for most all of us...

I agree! :o
« Last Edit: June 28, 2010, 05:15:52 PM by VingtTrois »
-A3K(T)040@35MHz/78MB/KS3.1/OS3.9/Buster11/PICASSO II/GVP IO/A2088XT/DENEB/HDD18GB
-A3K(D)030@25MHz/134MB RAM/KS3.1/OS3.9/Buster11/RETINA Z2/OKTAGON 2008/VLAB YC/MIDI/DKB3128/HDD18GB
-A2K/ROM 1.3-3.1/2MBCHIP/8MB/A2091/OKTAGON 2008/A2058/TANDEM IDE/FlickerFixer-Scandoubler/Genlock
-A1200/KS3.1/2MB+9MB/CF2GB A1200[/
 

Offline amigasociety

Re: A members father (William Frick) just passed away
« Reply #5 on: June 28, 2010, 05:21:19 PM »
Gods speed.  Always a hard time for any of us.  Remember the good times for sure.  tj
AmigaOne A1222 (Tabor)
AmigaOne X5000
 

Offline zurt

  • Full Member
  • ***
  • Join Date: Feb 2002
  • Posts: 114
  • Country: kp
    • Show only replies by zurt
Re: A member & friend's father (William Frick) just passed away
« Reply #6 on: June 28, 2010, 05:26:52 PM »
My deepest condolences for him.
zurt

AmigaOS user since 1989
MorphOS user since 2003
 

Offline outlawal2

Re: A member & friend's father (William Frick) just passed away
« Reply #7 on: June 28, 2010, 05:31:54 PM »
Just for the record, times are definitely tough for everyone right now, but I will also bet that most of us can spare a few dollars to help out someone who is truly in need...  I ask that anyone that can spare a few bucks please do so...  (And I apologize if my pushing the issue offends anyone. Absolutely NO ONE is obligated to do anything, but I am just asking my fellow Amigans to give it some thought is all.)   Thanks

PayPal address for donations is: marcandre@earthlink.net
 

Offline amigakit

Re: A member & friend's father (William Frick) just passed away
« Reply #8 on: June 28, 2010, 05:48:20 PM »
Sincerest condolences for him and his family.
www.AmigaKit.com - Amiga Reseller | Manufacturer | Developer

New Products  --   Customer Help & Support -- @amigakit
 

Offline Crumb

  • Hero Member
  • *****
  • Join Date: Mar 2002
  • Posts: 1786
  • Country: 00
    • Show only replies by Crumb
    • http://cuaz.sourceforge.net
Re: A member & friend's father (William Frick) just passed away
« Reply #9 on: June 28, 2010, 06:23:06 PM »
My condolences for him and his family
The only spanish amiga news web page/club: Club de Usuarios de Amiga de Zaragoza (CUAZ)
 

Offline koshman

  • Sr. Member
  • ****
  • Join Date: Nov 2009
  • Posts: 445
    • Show only replies by koshman
Re: A members father (William Frick) just passed away
« Reply #10 on: June 28, 2010, 07:00:04 PM »
My condolences to Marc...
- Radim
 
A600 - 68020/33, 10MB RAM, 3.1, 2GB SD
 

Offline XDelusion

  • Alien Breeder
  • Hero Member
  • *****
  • Join Date: Mar 2002
  • Posts: 5089
    • Show only replies by XDelusion
    • http://starwarslegacy.net/
Re: A members father (William Frick) just passed away
« Reply #11 on: June 28, 2010, 07:07:36 PM »
Sorry to hear.
Earth has a lot of things other folks might want... like the whole planet. And maybe these folks would like a few changes made, like more carbon dioxide in the atmosphere and room for their way of life. - William S. Burroughs
 

Offline trekiej

Re: A members father (William Frick) just passed away
« Reply #12 on: June 28, 2010, 07:21:44 PM »
rip
Amiga 2000 Forever :)
Welcome to the Planar System.
 

Offline marcfrick2112

  • Hero Member
  • *****
  • Join Date: May 2003
  • Posts: 811
    • Show only replies by marcfrick2112
Re: A members father (William Frick) just passed away
« Reply #13 on: June 29, 2010, 03:15:29 AM »
To everyone, Many, Many, thanks for the kind words... thanks to those who have donated.  I was not even aware that Save2600 had done this....

Having this posted on this forum is apropos, since my dad was also an Amiga fan (fanatic?) He owned 2 A1200's, one stock.... and one with an '030 / 10MB RAM (in my sig. , 'cause we owned everything together) Funny, my dad would complain about paying $3.00 for a loaf of bread, yet had no complaints about paying $600 for a used A4000, or $1000 for an A4000T... (still not working, :(  ) He used to restore old photos, make tape/CD/DVD labels and covers with his....

When I was younger, he used to complain about me spending so much time on that 'damn computer' So, I fixed him up good... I bought him an A600, and '030/32MB. Then, I could tell him to get off his damn computer ... :)

A few years ago, when my dad's eyesight was failing, he wanted to help by labeling a few floppies I left by his Amiga's. He found a disk containing 'SnoopDOS', but cause of his eyesight labeled it,  'Snooples'


Again, thanks for the kind wishes.... As Save2600 said to me, A.org is more that 'just' a forum, it's a group of friends.
---------------
Marc Frick
---------------
A1200T / \'060, 256MB, CD-R, OS3.9
A4000 w/ WarpEngine / 82MB , OS3.1
A4000 16MB, OS 3.9
A1200 , \'030 / 10MB
A1200 (stock)

CD32 :)

...And a very sick 4000T
 

Offline motrucker

Re: A members father (William Frick) just passed away
« Reply #14 on: June 29, 2010, 04:07:35 AM »
Sincere condolences.
A2000 GVP 40MHz \'030, 21Mb RAM SD/FF, 2 floppies, internal CD-ROM drive, micromys v3 w/laser mouse
A1000 Microbotics Starboard II w/2Mb 1080, & external floppy (AIRdrive)
C-128 w/1571, 1750, & Final Cartridge III+