2) If your Mediator is using a Radeon 92X0 configured for 256 MB, you will not have the memory address space for the X-Surf 100 without removal of any ZorRAM or BigRAM+ boards.
Now discuss among yourselves...
I have Radeon 92X0 configured for 256MB, X-Surf 100 and ZorRAM 256MB and memry address space seems sufficient for them since they boot together, but only if ZorRAM 256MB is plugged to closest to A4000 CPU slot.
To use X-Surf 100 I had to move FastATA4000 MK-VI to another A4000, because of all of them together reserving too much address space.
---
See my pictures of X-Surf 100
http://relay.pp.fi/images/album/X-Surf%20100/A little feedback on the hardware design:
1) R4 and R5 are very close to Zorro slot and sink inside it.
See picture.2) PCB is too thin and because of that it is never straight when not tightened.
See picture.
3) Didn't see any leds to indicate ethernet operation. Did you?
4) Golden contacts are good.
5) Finger hole to pull the card is good.
6) Assembled USB ports are good. (Waiting for USB module)
7) I like the blue color in it.