Welcome, Guest. Please login or register.

Author Topic: UBoot 1.3.1g for Sam440ep/Sam440ep-Flex boards available  (Read 4687 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline LectaTopic starter

UBoot 1.3.1g for Sam440ep/Sam440ep-Flex boards available
« on: December 06, 2020, 04:53:02 PM »
Bassano del Grappa, Italy - 06 Dec, 2020

ACube Systems is happy to announce the availability of another update to UBoot firmware for the Sam440ep, Sam440-Flex and Sam440-Flex SE.


Our commitment to the Amiga Community is still strong as it was at the beginning of our adventure, and it will bring more news in the upcoming year.

This release, a “Christmas gift” to all our customers, brings the following enhancements and fixes:

U-boot 1.3.1g — Dec 04, 2020

Improved support for Radeon HD and Radeon RX graphic cards.
Now you can use a Radeon HD / RX via a PCI to PCI Express adapter. On the Sam440ep flex motherboard, it is recommended to use PCI slot #1 for maximum performance. Please note that full support for Radeon RX is still under development and for this reason, with many models of gfx cards, U-Boot does not show any output, but the card works fine once the operating system is loaded.
     
Introduced a new menu entry to change the x86 gfx BIOS emulator accuracy.
If your graphic card show some visual problems on startup, try increasing the x86 BIOS emulator accuracy.
     
As always, read carefully the instructions in the archive.

You can find the updates on Sam440ep and Sam440ep-Flex product pages.

We hope you will enjoy this update.

Stay tuned for other news in the upcoming months.
« Last Edit: December 06, 2020, 05:03:18 PM by Lecta »
Regards,
Stefano Guidetti
AmigaOS4 Translator & Betatester
 
The following users thanked this post: klx300r

Offline nbache

Re: UBoot 1.3.1g for Sam440ep/Sam440ep-Flex boards available
« Reply #1 on: December 06, 2020, 06:01:44 PM »
Thanks, Lecta, cool!

On a plain Sam440ep (with the built-in graphics) it doesn't sound like there's anything of benefit in this update, is that correct?

Best regards,

Niels
 

Offline utri007

Re: UBoot 1.3.1g for Sam440ep/Sam440ep-Flex boards available
« Reply #2 on: December 06, 2020, 07:43:27 PM »
What is difference between Sam440 Flex-SE and Sam440 Flex? How do I know wich one I have?

Thanks! I have Radeon HD7800 series wich I bought a years ago for a this.
ACube Sam 440ep Flex 800mhz, 1gb ram and 240gb hd and OS4.1FE
A1200 Micronic tower, OS3.9, Apollo 060 66mhz, xPert Merlin, Delfina Lite and Micronic Scandy, 500Gb hd, 66mb ram, DVD-burner and WLAN.
A1200 desktop, OS3.9, Blizzard 060 66mhz, 66mb ram, Ide Fix Express with 160Gb HD and WLAN
A500 OS2.1, GVP+HD8 with 4mb ram, 1mb chip ram and 4gb HD
Commodore CDTV KS3.1, 1mb chip, 4mb fast ram and IDE HD
 


Offline Rob

Re: UBoot 1.3.1g for Sam440ep/Sam440ep-Flex boards available
« Reply #4 on: December 07, 2020, 02:13:54 AM »
This cable is a little more expensive but the PCIe socket is mounted at a right angle to the PCB so you could mount it to the inside of the case using standoffs although you'll probably need to drill and tap your own holes to screw the standoffs into.

https://www.aliexpress.com/item/32883199276.html?spm=a2g0o.productlist.0.0.68d2574fRNNRUE&algo_pvid=ad4ab3f2-1307-4921-b12a-e0c4dcb67e3e&algo_expid=ad4ab3f2-1307-4921-b12a-e0c4dcb67e3e-17&btsid=2100bdf016073061572247286e4482&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
 

Offline utri007

Re: UBoot 1.3.1g for Sam440ep/Sam440ep-Flex boards available
« Reply #5 on: December 07, 2020, 04:27:13 PM »
How about this, does these PCI to PCIe brides support 66mhz / 2x speed? Or do I need a PCIx to PCIe bridge?

Is there a Radeon HD basic driver in Sam 440 install media, to make testing easier??
ACube Sam 440ep Flex 800mhz, 1gb ram and 240gb hd and OS4.1FE
A1200 Micronic tower, OS3.9, Apollo 060 66mhz, xPert Merlin, Delfina Lite and Micronic Scandy, 500Gb hd, 66mb ram, DVD-burner and WLAN.
A1200 desktop, OS3.9, Blizzard 060 66mhz, 66mb ram, Ide Fix Express with 160Gb HD and WLAN
A500 OS2.1, GVP+HD8 with 4mb ram, 1mb chip ram and 4gb HD
Commodore CDTV KS3.1, 1mb chip, 4mb fast ram and IDE HD
 

Offline Rob

Re: UBoot 1.3.1g for Sam440ep/Sam440ep-Flex boards available
« Reply #6 on: December 08, 2020, 11:32:46 PM »
I posted it in the Amigaworld thread but it may be useful to other users here too.

A PCI to PCIe x16 adapter with the PEX 8112 bridge chip is recommended and the is code in the Radeon HD driver to oprimise the settings of the chip.
 

Offline klx300r

  • Amiga 1000+AmigaOne X1000
  • Hero Member
  • *****
  • Join Date: Sep 2007
  • Posts: 3244
  • Country: ca
  • Thanked: 20 times
  • Gender: Male
    • Show only replies by klx300r
    • http://mancave-ramblings.blogspot.ca/
Re: UBoot 1.3.1g for Sam440ep/Sam440ep-Flex boards available
« Reply #7 on: December 09, 2020, 02:52:45 PM »
way to go ACube  :D
____________________________________________________________________
c64-dual sids, A1000, A1200-060@50, A4000-CSMKIII
Indivision AGA & Catweasel MK4+= Amazing
! My Master Miggies-Amiga 1000 & AmigaOne X1000 !
--- www.mancave-ramblings.blogspot.ca ---
  -AspireOS.com & Amikit- Amiga for your netbook-
***X1000- I BELIEVE *** :angel:
 

Offline ciVic

  • Jr. Member
  • **
  • Join Date: Nov 2004
  • Posts: 98
    • Show only replies by ciVic
Re: UBoot 1.3.1g for Sam440ep/Sam440ep-Flex boards available
« Reply #8 on: January 04, 2021, 05:26:06 PM »
I remember that this board has some issues displaying full hd (1920x1080) via DVI. Is this still true or does it work flawlessly nowadays?