Welcome, Guest. Please login or register.

Author Topic: GVP A1230 Jaws jumpers?  (Read 3981 times)

Description:

0 Members and 2 Guests are viewing this topic.

Offline trilobyteTopic starter

  • Full Member
  • ***
  • Join Date: Oct 2006
  • Posts: 210
    • Show only replies by trilobyte
    • http://aaack.org
GVP A1230 Jaws jumpers?
« on: May 26, 2009, 03:28:10 AM »
Hi,

I am drooling at putting a new 16 MB GVP SIMM in my A1200's GVP "Jaws" 1230 accelerator, but I don't have a manual.  Anyone know what the jumpers are on this thing?

Thanks
t'byte
« Last Edit: May 27, 2009, 04:21:26 AM by trilobyte »
Amiga user since \'96, when I could finally afford one
Commodore 8-bit since before I could tie my shoes
 

Offline trilobyteTopic starter

  • Full Member
  • ***
  • Join Date: Oct 2006
  • Posts: 210
    • Show only replies by trilobyte
    • http://aaack.org
Re: GVP A1230 Jaws jumpers?
« Reply #1 on: May 30, 2009, 04:29:29 PM »
Quote from: trilobyte;456251
Hi,

I am drooling at putting a new 16 MB GVP SIMM in my A1200's GVP "Jaws" 1230 accelerator, but I don't have a manual.  Anyone know what the jumpers are on this thing?

Thanks
t'byte


*Bump*

Anybody?  The SIMMs will be arriving any time now and I don't know how to set the jumpers to get the accel to recognize them ... :\

thank you!
me
Amiga user since \'96, when I could finally afford one
Commodore 8-bit since before I could tie my shoes
 

Offline zipper

Re: GVP A1230 Jaws jumpers?
« Reply #2 on: May 30, 2009, 04:47:55 PM »
 

Offline Bazzaq

  • Sr. Member
  • ****
  • Join Date: Sep 2005
  • Posts: 363
    • Show only replies by Bazzaq
Re: GVP A1230 Jaws jumpers?
« Reply #3 on: May 30, 2009, 05:50:23 PM »
I have a manual for the 1230+ somewhere. don't know if it covers both models. Will have a look for it.
--------------
A4000T 060@50/PPC@233/128MB,Prometheus/Voodoo3/Lan,DCE SD/FF,Prelude
 

Offline Bazzaq

  • Sr. Member
  • ****
  • Join Date: Sep 2005
  • Posts: 363
    • Show only replies by Bazzaq
Re: GVP A1230 Jaws jumpers?
« Reply #4 on: May 31, 2009, 12:46:56 AM »
The manual i have is for the series 2, on this one you dont specify the amount of ram, you just tell it if its using any combination involving a 16mb simm.

So it has a jumper > jp3, that is installed if using a single 1 or 4mb simms. the jumper is removed if using a 16mb in either socket even if there is a 1 or 4 in the other.

Maybe this will help you a bit?
--------------
A4000T 060@50/PPC@233/128MB,Prometheus/Voodoo3/Lan,DCE SD/FF,Prelude
 

Offline Bazzaq

  • Sr. Member
  • ****
  • Join Date: Sep 2005
  • Posts: 363
    • Show only replies by Bazzaq
Re: GVP A1230 Jaws jumpers?
« Reply #5 on: May 31, 2009, 01:09:06 AM »
A quick google found these>

        A1230+ Jumper Settings (from page A.1 in manual)


 J1   ON = 68020 mode      OFF = 68030 mode   <------- wire a switch here
 J2   ON
 J3   OFF
 J4   OFF
 J5   ON = 16M SIMM        OFF = no 16M SIMM
 J6   OFF


 CN4  2-3
 CN5  1-2 = 4K ref SIMMS   2-3 = 2K ref SIMMS
 CN6  1-2
 CN7  2-3
--------------
A4000T 060@50/PPC@233/128MB,Prometheus/Voodoo3/Lan,DCE SD/FF,Prelude
 

Offline rednova

  • Hero Member
  • *****
  • Join Date: Mar 2007
  • Posts: 813
    • Show only replies by rednova
    • https://sites.google.com/site/rednova3d/
Re: GVP A1230 Jaws jumpers?
« Reply #6 on: May 31, 2009, 03:17:28 AM »
friend:
If you bought the simm from software hut, you can call their customer service number and they will help you set the jumpers.
Cheers!!!
-mobilis in mobile-
 

Offline trilobyteTopic starter

  • Full Member
  • ***
  • Join Date: Oct 2006
  • Posts: 210
    • Show only replies by trilobyte
    • http://aaack.org
Re: GVP A1230 Jaws jumpers?
« Reply #7 on: May 31, 2009, 05:15:37 PM »
Quote from: Bazzaq;457177
A quick google found these>

        A1230+ Jumper Settings (from page A.1 in manual)


(edit) Hmm... so you think that might be for the original Jaws board.  I have Googled every which way and not found anything conclusive.  I will see if that is what I need...

thanks,
t
« Last Edit: May 31, 2009, 05:18:00 PM by trilobyte »
Amiga user since \'96, when I could finally afford one
Commodore 8-bit since before I could tie my shoes
 

Offline trilobyteTopic starter

  • Full Member
  • ***
  • Join Date: Oct 2006
  • Posts: 210
    • Show only replies by trilobyte
    • http://aaack.org
Re: GVP A1230 Jaws jumpers?
« Reply #8 on: May 31, 2009, 05:23:03 PM »
Quote from: rednova;457187
friend:
If you bought the simm from software hut, you can call their customer service number and they will help you set the jumpers.
Cheers!!!


I sent them an email asking to have the information sent to me but haven't heard back.  Maybe they will put something in the package they ship...

thanks
t
Amiga user since \'96, when I could finally afford one
Commodore 8-bit since before I could tie my shoes
 

Offline trilobyteTopic starter

  • Full Member
  • ***
  • Join Date: Oct 2006
  • Posts: 210
    • Show only replies by trilobyte
    • http://aaack.org
Re: GVP A1230 Jaws jumpers?
« Reply #9 on: May 31, 2009, 05:25:21 PM »
Quote from: Bazzaq;457171
The manual i have is for the series 2, on this one you dont specify the amount of ram, you just tell it if its using any combination involving a 16mb simm.

So it has a jumper > jp3, that is installed if using a single 1 or 4mb simms. the jumper is removed if using a 16mb in either socket even if there is a 1 or 4 in the other.

Maybe this will help you a bit?


Thanks.  I definitely have the Jaws I and not Jaws II.  I figured it would have the 4/16 jumper, as this seems a common feature of GVP accels (I have a few for my A2000s as well).  Still though I think the jumpers for the "A1230+" Jaws board are different than the Jaws II board.  Confusing nomenclature too :)

I will check the other list you posted... which I think matches something I found on a French forum somewhere.  Since I don't speak French I couldn't tell if that forum thread was accurate or not.

thanks
t
Amiga user since \'96, when I could finally afford one
Commodore 8-bit since before I could tie my shoes
 

Offline Ilwrath

Re: A1230 Jaws jumpers?
« Reply #10 on: May 31, 2009, 05:48:38 PM »
I'm pretty sure I have the manual for both the original GVP A1230+ and 1230+ Series II.  Unfortunately, I have them at home, and won't be there until this evening.  

Just to confirm, you have the original GVP A1230+ that has no clock battery and no expansion port on it, correct?  (No place to plug a SCSI module...)
 

Offline trilobyteTopic starter

  • Full Member
  • ***
  • Join Date: Oct 2006
  • Posts: 210
    • Show only replies by trilobyte
    • http://aaack.org
Re: A1230 Jaws jumpers?
« Reply #11 on: May 31, 2009, 07:44:18 PM »
Quote from: Ilwrath;508424
I'm pretty sure I have the manual for both the original GVP A1230+ and 1230+ Series II.  Unfortunately, I have them at home, and won't be there until this evening.  

Just to confirm, you have the original GVP A1230+ that has no clock battery and no expansion port on it, correct?  (No place to plug a SCSI module...)


That is correct.  Spot on.  I have no (cry) connection for a (wail) SCSI module.  :D

Thanks!

- t
Amiga user since \'96, when I could finally afford one
Commodore 8-bit since before I could tie my shoes
 

Offline trilobyteTopic starter

  • Full Member
  • ***
  • Join Date: Oct 2006
  • Posts: 210
    • Show only replies by trilobyte
    • http://aaack.org
Re: GVP A1230 Jaws jumpers?
« Reply #12 on: June 02, 2009, 06:35:17 PM »
Quote from: Bazzaq;457177

 CN5  1-2 = 4K ref SIMMS   2-3 = 2K ref SIMMS
 


What do these refresh settings mean, anyway?  I see them on all the GVP accel boards.  Is it a speed thing?

thanks,
t
Amiga user since \'96, when I could finally afford one
Commodore 8-bit since before I could tie my shoes
 

Offline trilobyteTopic starter

  • Full Member
  • ***
  • Join Date: Oct 2006
  • Posts: 210
    • Show only replies by trilobyte
    • http://aaack.org
Re: GVP A1230 Jaws jumpers?
« Reply #13 on: June 02, 2009, 11:00:39 PM »
Quote from: Bazzaq;457177
A quick google found these>

        A1230+ Jumper Settings (from page A.1 in manual)


 J1   ON = 68020 mode      OFF = 68030 mode   <------- wire a switch here
 J2   ON
 J3   OFF
 J4   OFF
 J5   ON = 16M SIMM        OFF = no 16M SIMM
 J6   OFF


For the record, I installed the two 16MB SIMMs, and set J5 "on".  The system recognized a total of 16MB RAM.  I took out one of the SIMMs, re-inserted the board, and the system recognized 8MB RAM.

I then set J5 "off", installed the second SIMM again, and put the board back in, and the system recognized 32MB total.  Ran RAM tests, and passed twice.

So wherever this information came from, either it is wrong, or my board is different, or ... who knows.  But while risking setting jumpers incorrectly, I did get my A1200 up to 32MB RAM today :)

- t
Amiga user since \'96, when I could finally afford one
Commodore 8-bit since before I could tie my shoes
 

Offline Ilwrath

Re: A1230 Jaws jumpers?
« Reply #14 on: June 03, 2009, 12:36:49 PM »
Crap...  I forgot all about this thread.  I did find my manual, though, and have a PDF of it I scanned.  Anyhow, for GVP A1230 Turbo+ (original) you are correct, the only change is remove J5 for 16MB SIMMS.  Also, largest sized SIMM must go in Slot 1.

A1230 Turbo+ (original) Jumpers:
J1 - ON - 68020 / (OFF - 68030)
J2 - RESERVED (ON)
J3 - RESERVED (OFF)
J4 - RESERVED (OFF)
J5 - (ON - No 16MB SIMMS) / OFF - 16MB SIMMS PRESENT
J6 - RESERVED (OFF)

CN4 - RESERVED (OFF)
CN5 - (ON - 4k REFRESH DRAM 16M) / OFF - 2k REFRESH DRAM 16M
CN6 - RESERVED (ON)
CN7 - RESERVED (OFF)

(.)=DEFAULT

So, PM me your email address, if you want a PDF manual for any of the following:
GVP A1230 Turbo+ (original, no expansion port)
GVP A1230 Turbo+ Series II
GVP A1291 SCSI Kit Performance Series II (SCSI expansion for A1230+ Series II)
« Last Edit: June 03, 2009, 12:37:58 PM by Ilwrath »