farallon network card

[Marcel21674]

Found an old Farallon ethermac pc card. I wonder if I can use in on my amiga 1200. Problem is, I can't find any modelnumber on it.
 Only numbers I see: 8960851-00-03. then some barcode and then, 0000C556AB80. The last number seems to be the mac adres, correct?
 
 Does anyone know which card this is, and if I can use it on the 1200.
 If so, which drivers do I need?
 
 thank you very much

[VingtTrois]

http://eab.abime.net/showthread.php?t=26363

[Marcel21674]

http://eab.abime.net/showthread.php?t=26363

I'm aware of this list, but is does not really aswer my questions.

[Lurch]

So going by a quick google and some photos of it, yes it should work. As to what driver then things get a little harder.

I would plug it in and try the drivers available on aminet.

[Marcel21674]

So going by a quick google and some photos of it, yes it should work. As to what driver then things get a little harder.

I would plug it in and try the drivers available on aminet.

 hmm, ok. i'll try that.
 wich software do i use best? miami or does it not really matter?

[Robbie]

I'm not familiar with the card, but if it's a standard PCMCIA ethernet card you could try Miami with Cnet.device from Aminet? or Cnet16.device (same archive).

[Lurch]

hmm, ok. i'll try that.
 wich software do i use best? miami or does it not really matter?

Miami or any TCP/IP stack will work. I run Roadshow but you have to purchase that, doesn't really matter though.

[ncafferkey]

Some Farallon cards should work with 3c589.device.