Welcome, Guest. Please login or register.

Author Topic: MorphOS PowerBook G4 Failed to Start  (Read 830 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline hbarcellosTopic starter

  • Sr. Member
  • ****
  • Join Date: May 2006
  • Posts: 426
  • Country: 00
    • Show only replies by hbarcellos
MorphOS PowerBook G4 Failed to Start
« on: January 27, 2024, 10:18:37 PM »
 :'(
Any chance it’s not a dead GPU?

https://imgur.com/gallery/EidMVPO


}~ A1200 - Apollo 68040 - HOTLY running OS 3.1
}~ Powerbook G4 1.67 running MorphOS 3.2 without Wifi.
}~ Powermac Quicksilver 933 with Radeon 9600 XT (r300) LOUDLY running MorphOS 3.2
}~ [MY iOS GAME]: http://goo.gl/S9nWB (Amiga users can get it FREE[/color], just ask me)
 

Offline khayoz

  • Newbie
  • *
  • Join Date: Sep 2017
  • Posts: 20
    • Show only replies by khayoz
Re: MorphOS PowerBook G4 Failed to Start
« Reply #1 on: January 28, 2024, 05:23:41 AM »
Looks like a healthy screen, dont know what´s up with  the graphics though..
 

Offline AndyFC

Re: MorphOS PowerBook G4 Failed to Start
« Reply #2 on: January 28, 2024, 12:56:54 PM »
Oh no! Can you get into the boot options etc, pre MorphOS booting? I have a G5 Tower, and will assume these are the same for a PowerBook:

- Hold down Option during boot chime to get to the boot selector or
- Command + Option + O + F to get top Open firmware

If either of these appear it's more likely to be software related.
A1200 in DIY Tower. 3.2 ROMs (softkicking 3.2.2), OS 3.2.2 with ClassicWB, CF card, CD RW and IDE to SD adapter running off the internal IDE port (using the A4000 4-port IDE adapter from Amigakit), Pistorm 32 lite with Pi4/2GB/Emu68 or Blizzard 1230-IV, with 32MB 60ns RAM and 50MHz 68882 FPU. 3COM PCMCIA Network card running with Miami DX.
MorphOS on PowerMac G5 and ATI 9600 pro
 

Offline Amigamia

  • Sr. Member
  • ****
  • Join Date: Jun 2005
  • Posts: 252
  • Country: us
    • Show only replies by Amigamia
    • http://www.arosworld.org
Re: MorphOS PowerBook G4 Failed to Start
« Reply #3 on: January 28, 2024, 11:40:02 PM »
If it's the graphic chip having an issue it won't display anything no matter what. You should have a DVI port on the side where you can connect an external monitor. That can help you test if it's the graphic chip or the LCD itself.

If it's the chip, it can still be repaired but it's a tedious work. It will require to take the whole logic board out and reflow the chip.
Check out  AROSWORLD.ORG
 

Offline hbarcellosTopic starter

  • Sr. Member
  • ****
  • Join Date: May 2006
  • Posts: 426
  • Country: 00
    • Show only replies by hbarcellos
Re: MorphOS PowerBook G4 Failed to Start
« Reply #4 on: January 30, 2024, 02:29:27 AM »
Ended up leaving a hairdryer blowing hot air inside it.
The only change was a melted function key

That’s really sad…
}~ A1200 - Apollo 68040 - HOTLY running OS 3.1
}~ Powerbook G4 1.67 running MorphOS 3.2 without Wifi.
}~ Powermac Quicksilver 933 with Radeon 9600 XT (r300) LOUDLY running MorphOS 3.2
}~ [MY iOS GAME]: http://goo.gl/S9nWB (Amiga users can get it FREE[/color], just ask me)