ATX PSU with Amiga schematic

[Piru]

@motorollin

You should perhaps mark from which side the connectors are seen (or else someone might mirror the connections, though that should be caught when testing the voltages).

Also, this configuration doesn't work (or rather always works;) for PSUs that don't have the power switch on the back, this config is always powered. I'd suggest attaching the powerswitch between pins 14 and 15 instead of just short circuiting the pins.

[Piru]

@motorollin

You can tell by the location of the square holes.

I don't see any square hole on the amiga side connector.

It might be obvious to you (you did draw it after all), but it might not be to everyone else.