« on: January 04, 2023, 02:56:38 PM »
Im sure that aslong as you have ensured no partition on the drive connected to the A1200's onboard IDE has been set as bootable and none of its partiton names conflict with any on the EHIDE of the TF then it should show up in WB once booting is complete.
« Last Edit: January 04, 2023, 02:57:23 PM by AmiBoy »
Logged
Escom A1200, Power Tower, OS3.9 & BB2, HD-Floppy drive, Mediator PCI, Voodoo 3 3000 16MB, Soundblaster 4.1, TV Tuner Card, 10/100MBit Ethernet card, Apollo 68060 66MHz with 64MB, 9.5Gig HD and 52xCDRom
Also one spare unworking bare A1200
The following users thanked this post: RetroPassion
