Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Installing PFS3AIO on Amiga OS3.2  (Read 3755 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline AndyFC

Re: Installing PFS3AIO on Amiga OS3.2
« on: July 28, 2023, 07:14:10 AM »
Hi there. Yes PFSAIO can be used on boot partitions, I have it installed on my CF card which I boot from.

I needed to install it on a new drive earlier this week and couldn't remember some of the settings so found the included AmigaGuide doc very useful. I also found this page and the section called "Optional: Use the pfs3 file system" https://johan.driessen.se/posts/Setting-up-a-Compact-Flash-card-with-Classic-Workbench-and-WHDLoad-for-Amiga-600-1200/.

You then need to format the partition so you will lose any existing data.


« Last Edit: July 28, 2023, 07:15:54 AM by AndyFC »
Logged
A1200 in DIY Tower. 3.2 ROMs (softkicking 3.2.2), OS 3.2.2 with ClassicWB, CF card, CD RW and IDE to SD adapter running off the internal IDE port (using the A4000 4-port IDE adapter from Amigakit), Pistorm 32 lite with Pi4/2GB/Emu68 or Blizzard 1230-IV, with 32MB 60ns RAM and 50MHz 68882 FPU. 3COM PCMCIA Network card running with Miami DX.
MorphOS on PowerMac G5 and ATI 9600 pro
 
Pages: [1]   Go Up
« previous next »