Software update for Indivision AGA

[yssing]

If only this sort of HW could be made for the A600

[kolla]

If only this sort of HW could be made for the A600.

Would be lovely yes. And a new CPU+RAM card ofcourse. With integrated USB controller. And ethernet, and...  :-D

[Lorraine]

The A600 is cool in its own right imo, but there is no market for it as the A1200 offers at lot more for just being slightly bigger size.

[easy_john]

Does Iniv4000 fit AGA slot or over Alice Chip, like Indiv1200?

I plain to add 4000Di Mediator in near future, and it dosnt have AGA slot.

PS I already buy indiv1200 and very happy with it.

PPS but if Indiv.FF have internal connector for vga signal from b/c-vision and switch to quick change signal source - it vill be absolutely perfect.
I have b/c-vision and must use external switcher, its take lot place, many cords, etc..

[trixster]

Sorry to drag up a really old thread, but did you ever find a way to fix this issue? My newly acquired A4000 has an indivision AGA fitted and I'm seeing this exact same 'letterboxing' with PAL and NTSC.

Hello Jens

I've got a couple of questions regarding Indivision that I hope is OK to ask here :-)

* 800x600 mode? I tried using Super72, but it doesnt really work well, I dont know it if it's supposed to work well either though. Is there something like HighGfx that can provide a good 800x600 with Indivision?

* I would love to have the 640x512 PAL display to fill my TFT not only horisontally, but also vertically. The best I have managed so far is this weird letterbox-like mode with borders above and below.

I have put various screenshots and related pics on my webserver, it shows how PAL mode never reaches the top of my monitor display. It's a bit annoying when playing games, since the picture is not displayed in 4:3 as it was meant to be. I've tried to tweak H-sync and V-sync, but only managed to freak out the monitor to not show anything. :-)

http://amiga.nvg.org/moro/Indivision_AGA/

Other than these tiny problems, I really love it - thanks alot for a great product!

[goldfish]

Have we gone back in time 2009 ?

[goldfish]

Kolla Vampire is the A600 answer to hires screen output and with a hell of speed incress as well. Price is only down side if only this hardware could be made more affordable.

[trixster]

Have we gone back in time 2009 ?

Like I said, dragging up an old thread but Kolla's issue is relevant to what I'm seeing with my A4000 and the thread left his quandary hanging. So I'm wondering if it was ever resolved. A long old look through the Amiga.org and eab doesn't show anything but I could well have missed it.

The Indi AGA config does not seem to give anyway to manipulate the output of PAL 640x512 and NTSC 640x480 resolutions like the AGA Mk2 config does.

[polyp2000]

Have we gone back in time 2009 ?

Hah -
Every time this thread gets updated, for all of a few minutes I think
"wow about time there was a firmware update" but this is always short lived as i realize its just got bumped again.

Will the promised graffiti emulation ever surface or was this just another idle promise without any intention?

[Menthos]

Will the promised graffiti emulation ever surface or was this just another idle promise without any intention?

I'm also waiting for the Graffiti emulation... Still hoping but not beliving it will turn up.

[kolla]

Kolla Vampire is the A600 answer to hires screen output and with a hell of speed incress as well. Price is only down side if only this hardware could be made more affordable.

Sure, this was something I wrote 7 years ago, back in 2009.

[gertsy]

Like I said, dragging up an old thread but Kolla's issue is relevant to what I'm seeing with my A4000 and the thread left his quandary hanging. So I'm wondering if it was ever resolved. A long old look through the Amiga.org and eab doesn't show anything but I could well have missed it.

The Indi AGA config does not seem to give anyway to manipulate the output of PAL 640x512 and NTSC 640x480 resolutions like the AGA Mk2 config does.

I'm sure someone has an answer.....

[kolla]

I'm sure someone has an answer.....

I never found a solution for this.

[RealHomer]

I'm also waiting for the Graffiti emulation... Still hoping but not beliving it will turn up.

Wait, Graffiti actually worked?  Mine has just been sitting in a box.  I could never get it to work even after corresponding with Jens.  Output was the same whether plugged in or not.  I always thought it was a hoax.