Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: WTB: Amiga 2000 motherboard  (Read 361 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline bpadgettTopic starter

  • Newbie
  • *
  • Join Date: Mar 2016
  • Posts: 6
    • Show only replies by bpadgett
WTB: Amiga 2000 motherboard
« on: March 17, 2016, 03:13:24 AM »
need amiga 2000 motherboard.  Prefer Rev 6.2

Thanks
Logged
 

Offline bpadgettTopic starter

  • Newbie
  • *
  • Join Date: Mar 2016
  • Posts: 6
    • Show only replies by bpadgett
Re: WTB: Amiga 2000 motherboard
« Reply #1 on: April 05, 2016, 03:29:06 AM »
Still need motherboard for my 2000.  The one I have has been butchered to the point that I cant repair it.  Has no video and f5 is tested good.  Any help would be greatly appreciated
Logged
 

Offline Oldsmobile_Mike

Re: WTB: Amiga 2000 motherboard
« Reply #2 on: April 05, 2016, 04:33:05 AM »
Might help if you posted where you're located and if you have any requirements re: NTSC v. PAL, etc. Good luck, A2000's are tanks, hard to believe yours can't be repaired! :(
Logged
Amiga 500: 2MB Chip|16MB Fast|30MHz 68030+68882|3.9|Indivision ECS|GVP A500HD+|Mechware card reader + 8GB CF|Cocolino|SCSI DVD-RAM
Amiga 2000: 2MB Chip|136MB Fast|50MHz 68060|3.9|Indivision ECS + GVP Spectrum|Mechware card reader + 8GB CF|AD516|X-Surf 100|RapidRoad|Cocolino|SCSI CD-RW
 Amiga videos and other misc. stuff at https://www.youtube.com/CompTechMike/videos
 

Offline bpadgettTopic starter

  • Newbie
  • *
  • Join Date: Mar 2016
  • Posts: 6
    • Show only replies by bpadgett
Re: WTB: Amiga 2000 motherboard
« Reply #3 on: April 06, 2016, 02:55:45 AM »
Need NTSC motherboard.  Would prefer at least a vers 6.  I live in Wichita, Ks.  Board flashes video (white edge) and then goes black.  Has multiple fuses dead and something smelt burnt when I first turned it on after jumping fuse f5.  Has multiple trace damage from prior work.  Not sure I have the experience to fix this one.
Logged
 

Offline bpadgettTopic starter

  • Newbie
  • *
  • Join Date: Mar 2016
  • Posts: 6
    • Show only replies by bpadgett
Re: WTB: Amiga 2000 motherboard
« Reply #4 on: April 10, 2016, 09:51:31 PM »
further news:  R215 is the component that I smelled burnt.  Cant tell value due to burning and amiga schematic I have does not list the value.  Resistor solders in to one end of where R215 shows and the other end connects to a pad under the words emi 310.  This is a revision 6.2 board.  Can anyone give me any ideas where to find the value of this resistor?  Does this normally burn out or is there something else to replace as well???
Logged
 
Pages: [1]   Go Up
« previous next »