For sale : Romy A4000D

[Cosmos]

For sale these new Romy A4000D

Very high PCB quality and perfect factory soldering


Romy allow 1 Mb Kickstart, all right for the 3.9 (Kickstart 3.0 and 3.1 are 512 Kb only)


Installation :
You have to clean up very well all Fat Gary pins before plugging Romy on it.
Please, use acetone with a cotton swab and rub strongly the 4 sides of the IC !

Note :
If your accelerator card have a maprom option, disable it and use software
Kickstart remapper


Please wait a bit for the price...

[Cosmos]

No prob!  Sorry, didn't mean to irk anyone, Cosmos makes some top-notch stuff, I swear by several of his patches that I run on my A2000.  Am sure his Romy's are great for folks who need them!  

I had only the idea for Romy (and I found his cool name) : SpeedGeek built her all...

I have some other good projects, hope they become reality one day !

[Cosmos]

I ask 18 € + 1.50 € shipping in gift on my Paypal

[Cosmos]

Still 25 Romy available for sale !

[Cosmos]

Here a good HowTo : http://www.mfilos.com/2010/12/guide-create-and-burn-custom-kickstart.html

[Cosmos]

About 20 Romy available !

New price : 15 euros + 1.50 euros shipping worldwide in gift on my Paypal

[Cosmos]

For Aros, I don't know...

Theorically, yes : you have just to put "dc.w $1114/jmp $00F80002" at $00E00000 or the little library "romheader" in the Remus package

[Cosmos]

The last 5 Romy available !

15 euros + 1.50 euros shipping WW

[Cosmos]

All sold !

[Cosmos]

Too late !!

[Cosmos]

New batch of 50 Romy available !

They come now with a new rev11 firmware compatible with the 4000T

Warning with the 4000T : the two Gals PIO2 fix are required for working properly !

Price : 17 euros on my Paypal in gift/friend mode only

+ 1 euros for France (Priority no tracking)
+ 2 euros for EU (Priority no tracking)
+ 2.60 euros for WW (Priority no tracking)

or

+ 5.50 euros for EU (Priority with tracking)
+ 6 euros for WW (Priority with tracking)

[Cosmos]

I'd like to get one for my A4000T but can you detail or link a place that shows this PIO2 fix I will need to do?

===> http://leblogdecosmos.blogspot.fr/2015/12/romy-a4000t.html


Soldering is required for the 4000T even if you don't use the IDE, you need to put P651 and P652 on sockets : http://leblogdecosmos.blogspot.fr/2013/02/a4000t-pio2.html

On the 4000D : Romy is working fine with PIO0 (original) and PIO2 !

[Cosmos]

Yes, I have 6 available in stock !