Amiga.org

Amiga computer related discussion => Amiga Marketplace => Topic started by: bpadgett on March 17, 2016, 03:13:24 AM

Title: WTB: Amiga 2000 motherboard
Post by: bpadgett on March 17, 2016, 03:13:24 AM

need amiga 2000 motherboard.  Prefer Rev 6.2

Thanks

Title: Re: WTB: Amiga 2000 motherboard
Post by: bpadgett on April 05, 2016, 03:29:06 AM

Still need motherboard for my 2000.  The one I have has been butchered to the point that I cant repair it.  Has no video and f5 is tested good.  Any help would be greatly appreciated

Title: Re: WTB: Amiga 2000 motherboard
Post by: Oldsmobile_Mike on April 05, 2016, 04:33:05 AM

Might help if you posted where you're located and if you have any requirements re: NTSC v. PAL, etc. Good luck, A2000's are tanks, hard to believe yours can't be repaired! :(

Title: Re: WTB: Amiga 2000 motherboard
Post by: bpadgett on April 06, 2016, 02:55:45 AM

Need NTSC motherboard.  Would prefer at least a vers 6.  I live in Wichita, Ks.  Board flashes video (white edge) and then goes black.  Has multiple fuses dead and something smelt burnt when I first turned it on after jumping fuse f5.  Has multiple trace damage from prior work.  Not sure I have the experience to fix this one.

Title: Re: WTB: Amiga 2000 motherboard
Post by: bpadgett on April 10, 2016, 09:51:31 PM

further news:  R215 is the component that I smelled burnt.  Cant tell value due to burning and amiga schematic I have does not list the value.  Resistor solders in to one end of where R215 shows and the other end connects to a pad under the words emi 310.  This is a revision 6.2 board.  Can anyone give me any ideas where to find the value of this resistor?  Does this normally burn out or is there something else to replace as well???