Amiga.org

Amiga computer related discussion => Amiga community support ideas => Topic started by: S0nic on January 17, 2013, 10:26:19 PM

Title: 1084s monitor problems
Post by: S0nic on January 17, 2013, 10:26:19 PM
last time i was play i move little luma cable and i get sound on c64 play little then turn off c64 , today i try again to play and i have problem:

with luma cable i have good picture on 1084s with c64 but there is no sound, try to move luma cable left-right up-down but still no sound

open amiga 500 and amiga 600 connect it on RGB port with 1084s , still no sound on amiga's and picture on RGB port is not good like on c64 , i have sh.t picture lot's of black and no sound with RGB , here is video

http://www.youtube.com/watch?feature=player_embedded&v=VRugXNHOZrE

(http://www.youtube.com/watch?feature=player_embedded&v=VRugXNHOZrE)
Title: Re: 1084s monitor problems
Post by: kickstart on January 17, 2013, 11:58:49 PM
@sonic

sorry i dont understand your explain at all but rgb and luma arent the same, 1084s hace some switch on the back, try it with the correct position.
Title: Re: 1084s monitor problems
Post by: S0nic on January 18, 2013, 12:04:19 AM
Quote from: kickstart;723009
@sonic

sorry i dont understand your explain at all but rgb and luma arent the same, 1084s hace some switch on the back, try it with the correct position.

yeah i know , i use luma for c64 and rgb for amiga's , when i wish to use amiga's i click back on rgb button and have amiga's if i wish to have c64 i turn off that button and have luma signal , but there is no sound on luma and rgb , when i play on c64 with luma have good picture no sound, when i click use rgb with amiga's i have sh.t picture (like on video i send up) and no sound like on luma :(
Title: Re: 1084s monitor problems
Post by: kickstart on January 18, 2013, 12:17:35 AM
@sonic

Dont know... maybe the cable, speakers... try with headphones connected to monitor (maybe speakers dont work) or use another sound source (mp3 player).
Title: Re: 1084s monitor problems
Post by: S0nic on January 18, 2013, 12:31:30 AM
i get sound with chinch cable on amiga but picture on amiga are still sh.t on c64 with luma i have good picture but there is no sound :(

why i have oem commodore luma cable with 3 chich what is differnt between that and this luma cable with 4 chinch ?

http://www.ebay.com/itm/Commodore-64-C64-C128-Luma-Chroma-Video-Lead-cable-for-1084S-Monitor-/260894700043
Title: Re: 1084s monitor problems
Post by: S0nic on January 18, 2013, 01:13:10 AM
is this two cable are same , i have this one


(http://i7.photobucket.com/albums/y266/DalmatinacST/222-1_zps29bd90ae.jpg)


i think that cable is broken so i will buy another i think monitor is OK because i have normal picture with c64 (luma)

  is this cable same like mine on first picture

(http://i7.photobucket.com/albums/y266/DalmatinacST/111_zpsf46e6926.jpg)


I ask is cable same because the pin on smaller part of cable are not same on mine (first picture) and on this on second picture so maybe i have bad picture on rgb is because of that pin's or my cable is really broken and don't work , or rgb port on monitor 1084s don't work
Title: Re: 1084s monitor problems
Post by: kickstart on January 18, 2013, 06:03:20 AM
The original 1084s rgb cable is like your first pic.
Title: Re: 1084s monitor problems
Post by: S0nic on January 18, 2013, 01:13:59 PM
Quote from: kickstart;723038
The original 1084s rgb cable is like your first pic.

second picture cable is original commodore too , what is difference between this 2 cable, pin on smaller part not on same place