ShapeShifter - Change Floppy Images On The Fly

[arongooch]

Hi all. Ive recently been playing around with ShapeShifter on my A600 with Vampire card. I have the emulator working quite well and I can boot into Mac OS 7.5 and I have successfully setup a 30MB file-based HDD and initialised it.

The problem I am having and cannot for the life of me work out after searching online and reading the ShapeShifter guide is how to change the disk images on the fly as the emulator is running?

I can Amiga+M back to the desktop and back again no problems but when I go back to the Amiga side there is no user interface for ShapeShifter and therefor cannot change the disk images. What am I missing here? Cheers for any help

[arongooch]

Sorry, I should of been more clear.

Floppy disk images not harddrive images.

I have 7 floppy disk images of OS 7.5 of which I can insert 2 of in ShapeShifters user interface window before the emulation begins. I can boot into this OS no problems from disk 1 but then once booted there appears no way I can bring up ShapeShifters user interface to insert the rest of the disks to continue the OS installation.

[arongooch]

Cheers everyone for the advice. I sort of went a different route with this though. The whole objective was to install Mac OS 7.5. I ended up just mounting an ISO image file of Mac OS 7.5.3 instead using the floppy based install.

Also to copy certain files across downloaded from the net and what not to run on the mac I used the "Mac" handler tool in the ShapeShifter folder that allows a tunnel between Workbench and the Mac harddrive image when the emulation is running. This way I could just use D-Opus and copy files directly the the Mac harddrive. Worked a treat.