Welcome, Guest. Please login or register.
Amiga Kit Amiga Store Iridium Banner AMIStore App Store A1200/A600 4xIDE Interface

AuthorTopic: PCMCIA CARD AND BOOT DISK PROBLEMS- WORKBENCH 3.0  (Read 1976 times)

0 Members and 1 Guest are viewing this topic.

Offline wrath of khan

Re: PCMCIA CARD AND BOOT DISK PROBLEMS- WORKBENCH 3.0
« Reply #45 on: January 22, 2021, 06:24:10 AM »
Thanks, yes i got it working once i sorted the dos drivers bit. Thanks. Previously i also formatted it to the wrong file format.
So now i have it working but only can access i think 2 or 3 gigs. I will try formatting the card again to restore the 16 gigs.

I have an 020 accelerator incoming and I lucked into an old Crt telly locally. Soon I will have a decent set-up but will buy a vampire a1200 whenever I get notified.
 

Offline Pat the Cat

Re: PCMCIA CARD AND BOOT DISK PROBLEMS- WORKBENCH 3.0
« Reply #46 on: January 22, 2021, 02:29:37 PM »
Most excellent news. ;D

Do let us know if you get the full 16GB on one partition fired up or not. I for one would love to know for sure.

And which filesystem worked on the PC end? EXFAT? Or FAT32?
"To recurse is human. To iterate, divine."

A1200, Vanilla, Surf Squirrel, SD Card, KS 3.0/3.z, PCMCIA dev
A500, Vanilla, A570, Rev 5, KS 1.2/1.3 Testbench system
Rasp Pi, UAE4ARM, 3D laser scanner, experimental, hoping for AmigaOS4Arm, based on Watterott Fabscan Pi