Welcome, Guest. Please login or register.
Amiga Kit Amiga Store Hollywood MAL AMIStore App Store A600 Memory

AuthorTopic: Amiga KS1.1 Custom Demo v1.1 disk  (Read 280 times)

0 Members and 1 Guest are viewing this topic.

Offline blakespot

Amiga KS1.1 Custom Demo v1.1 disk
« on: December 06, 2019, 04:19:30 AM »
Is this a rare thing? I found it in the disks that came with my A1000 purchased a few years ago. It has the early demos Molly, HAM, Colorful, Fields, Boing, Amiga 3D, etc. that I had on an earlier 1.0 demo disk, but this works under KS 1.3 and even 3.1 while the earlier versions of these only worked under KS 1.0 and maybe 1.1.

This text from Amiga service manual refers to it as a utility for service centers. There is a Notepad file on the disk that talks of it in the same capacity as below, but rather more briefly. Is this archived?

https://archive.org/stream/Amiga_Computer_Model_1000_Assembly_Level_Repair_1985_Commodore/Amiga_Computer_Model_1000_Assembly_Level_Repair_1985_Commodore_djvu.txt

I've made it into an ADF.


Quote
VERSION C-l.l CUSTOM DEMO DISKETTE
OPERATION PROCEDURES

The Version C-l.l Custom Demo Diskette has proved to be a very effective tool
to isolate Custom IC failures on the Amiga 1000 System. The listed instructions
will provide a step by step guide to using this diskette.

*** USE THE TROUBLESHOOTING PROCEDURES CONTAINED IN THE AMIGA 1000 ***

*** ASSEMBLY LEVEL REPAIR SECTION OF THE AMIGA SERVICE MANUAL TO ***

*** ENSURE THAT THE PCB IS THE FAILED ASSEMBLY. ***

*** ***

*** PLEASE REFER TO SECTION 3 FOR EXPLANATIONS OF COMMONLY USED TERMS ***



Step 1 Before applying power to the system, connect an External Drive, 256K
Ram Expander and Mouse Controller.

Step 2 After System power up the Kickstart Prompt will be displayed.

At this Prompt, insert the Version 1.1 Kickstart Diskette into the

Internal Drive.

NOTE: If the Kickstart Prompt is not displayed refer to Section 2

Step 3 When Kickstart is loaded the Workbench Prompt will be displayed.

At this Prompt, remove the Kickstart Diskette from the Internal Drive
and insert the Custom Demo Diskette.

NOTE: If the Workbench Prompt is not displayed or the Kickstart
Prompt displays again, refer to Section 2.

Step 4 When the Workbench Screen is displayed. Activate the Custom Demo ICON
NOTE: If the ICON cannot be Activated or the Workbench Screen does
not display correctly, refer to Section 2.

Step 5 When the Custom Demo ICON Window is displayed, Activate the H.A.M.
Demo ICON. The H.A.M. Demo will display all 4096 Colors that the
System is capable of producing.
NOTE: If the Demo displays correctly, close the window by selecting

the Gadget in the upper left hand corner.
NOTE: If the H.A.M. Demo does not display or displays incorrectly,
refer to Section 2.

Step 6 Activate the Molly Demo ICON. The Molly Demo displays colored balls
which should move smoothly and continuously.
NOTE: If the Demo displays correctly, close the window by pulling

down the screen until the Molly Window is visible, select the

Gadget in the upper left hand corner then pull the Workbench

Screen back up to the top of the display.
NOTE: If the Molly Demo does not display or displays incorrectly,

refer to Section 2.



VERSION C-l.l CUSTOM DEMO DISKETTE
OPERATION PROCEDURES

Step 7 Activate the Fields Demo ICON. The Fields Demo displays 3-dimensional
translucent, randomly shaped polygons of different colors rotating on"
the screen.
NOTE: If the Demo displays correctly, close the window by pulling

down the screen until the Fields Window is visible, select the

Gadget in the upper left hand corner then pull the Workbench

Screen back up to the top of the display.
NOTE: If the Fields Demo does not display or displays incorrectly,

refer to Section 2.

Step 8 Activate the Colorful Demo ICON. The Colorful Demo displays 256

colors, changing red shades from too to bottom and blue* shades from

left to right.

NOTE: If the Demo displays correctly, close the window by selecting

the Gadget in the upper left hand corner.
NOTE: If the Colorful Demo does not display or displays incorrectly,

refer to Section 2.

Step 9 Activate the Amiga 3D Demo ICON. The Amiga 3D Demo displays a 3-
Dimensional Amiga Logo rotating on the screen.
NOTE: If the Demo displays correctly, close the window by selecting

the Gadget in the upper left hand corner.

** The Gadget will not be visible on the screen
NOTE: If the Amiga 3D Demo does not display or displays incorrectly,

refer to Section 2.

.Step 10 'Activate the Boing! Demo ICON. The BoingI Demo displays a bouncing
ball with a shadow. To view the Demo, pull the Workbench Screen down
approximently 2/3 of the way and wait for the ball to fully develop.
Click the right mouse button to speed up the Demo and the left button
to slow it down. The System- Audio is tested using this Demo.
NOTE: If the Demo is displayed correctly and both channels are

producing audio, close the window by selecting the Gadget in

the upper left hand corner then pull the Workbench Screen back

up to the top of the display.

** The Gadget will not be visible on the screen.
NOTE: If. the Boingi Demo does not display, displays incorrectly, both

channels are not producing audio or audio is distorted, refer

to Section 2.

Step 11 Insert a Blank or Scratch Diskette in the External Drive. Move the
mouse to the Custom Demo Icon, Press and hold down the left button,
Move the mouse until it is over the DFl-ICON then release the button.
When the Disk Copy window is displayed, select the Continue Option.
NOTE: When the Disk Copy is complete and the Custom Demo ICON*window
is displayed, the Custom IC Tests are Complete.

*** IF ALL THE CUSTOM DEMOS OPERATE CORRECTLY IT MAY BE NECESSARY TO ***
*** CHECK THE SYSTEM BY DIRECTLY EMULATING THE CONDITIONS UNDER WHICH ***

*** THE CUSTOMER COMPLAINT SYMPTOMS OCCUR. ***

** * **ยป

*** IF THE PC3 FAILURE IS NOT THE RESULT OF ONE OF THE SOCKETED CUSTOM ***
*** IC'S PCB REPLACEMENT/EXCHANGE IS RECOMMENDED AT THIS TIME ***
:: http://www.bytecellar.com - The Vintage Computing Weblog
:: http://toucharcade.com - iPhone Gaming News and Reviews
:: Amigas: 1000, 2000, 1200 \'060, SAM440ep-Flex 733