Welcome, Guest. Please login or register.
Amiga Kit Amiga Store Iridium Banner AMIStore App Store A600 Memory

AuthorTopic: Creating & writing to .adf & .hdf files in OS4.x  (Read 1268 times)

0 Members and 1 Guest are viewing this topic.

Offline Haranguer

Creating & writing to .adf & .hdf files in OS4.x
« on: November 29, 2015, 06:37:21 PM »
I have an AmigaOne X1000 running OS 4.1, and I have recently bought a FPGA Arcade Replay board.

The Arcade Replay when it has an Amiga core installed can access .adf & .hdf files (as created under WinUAE) and no other files.  It doesn't have a network port or a USB port yet - they are planned for a future daughter board.

Is there a way I can create and write to .adf & .hdf files under Amiga OS 4.x? I know I can do it under Windows using WinUAE or Total Commander, but using a PC to allow one Amiga to communicate with another seems like giving up.

I'd appreciate any advice I can get about this.
 

Offline smf

Re: Creating & writing to .adf & .hdf files in OS4.x
« Reply #1 on: November 29, 2015, 07:19:41 PM »
Install this: http://os4depot.net/share/driver/storage/diskimage_device.lha

With diskimage device you can mount lots of different disk images and it can also do writing to them, i have never used it with hdf and i don't have any hdf files available but it should write to them too.
 

Offline Haranguer

Re: Creating & writing to .adf & .hdf files in OS4.x
« Reply #2 on: November 30, 2015, 01:14:27 AM »
Thanks smf.  I'll give it a try :)