Welcome, Guest. Please login or register.
Amiga Kit Amiga Store Hollywood MAL AMIStore App Store A600 Memory

AuthorTopic: Internal flicker-fixer/scan-doubler for CD32?  (Read 588 times)

0 Members and 1 Guest are viewing this topic.

Offline StevenJGore

Internal flicker-fixer/scan-doubler for CD32?
« on: June 13, 2003, 03:31:43 PM »
Does an internal flicker-fixer/scan-doubler for an A1200 also work with a CD32?

I'm referring to Power Computing's internal ff/sd that clips over the Lisa and Alice chips.

Since the CD32 also has these chips, I would have thought that in theory it would be fine.

Anyone tried it or know about it?

Thanks!
Steve.
 

Offline Brian

Re: Internal flicker-fixer/scan-doubler for CD32?
« Reply #1 on: June 13, 2003, 04:48:25 PM »
In theory it sounds about right... and with Lisa and Alice being so close to each other on the CD32 motherboard I don't think you'll have any trouble with cable lengt when fitting it either. I doubt there's any danger in trying it but question is if one is willing to take a chanse cause that's what it is. ;-)

Offline kolla

Re: Internal flicker-fixer/scan-doubler for CD32?
« Reply #2 on: June 13, 2003, 06:04:35 PM »
Also a clock port adapter would be cool, too bad the SX32 didnt come with it.

With a clockport, subway and USB ethernet adapter, and ofcourse ethernet-adapter support in Poseidon, the CD32 would finally be able to hook onto the network :)
B5D6A1D019D5D45BCC56F4782AC220D8B3E2A6CC
---
A3000/060CSPPC+CVPPC/128MB + 256MB BigRAM/Deneb USB
A4000/CS060/Mediator4000Di/Voodoo5/128MB
A1200/Blz1260/IndyAGA/192MB
A1200/Blz1260/64MB
A1200/Blz1230III/32MB
A1200/ACA1221
A600/V600v2/Subway USB
A600/Apollo630/32MB
CD32/SX32/32MB/Plipbox
CD32/TF328
A500/V500v2
A500/MTec520
CDTV
MiSTer, MiST, FleaFPGAs and original Minimig
Peg1, SAM460 and Mac minis with MorphOS
 

Offline JurassicCamper

Re: Internal flicker-fixer/scan-doubler for CD32?
« Reply #3 on: June 13, 2003, 06:24:25 PM »
If that doesn't work you can always cut a small hole in the fmv cover
at the back and fit a 23 PIN D type connector.
Just solder the correct pins for
R
G
B
GND
V sync
H sync
To the FMV connector
Then use an external scandoubler.
A1200T PPC 330Mhz in a Custom Modified Fractal Design R3 Case