Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: NTSC -> PAL?  (Read 1108 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline _caddy_Topic starter

  • Full Member
  • ***
  • Join Date: Aug 2004
  • Posts: 116
    • Show only replies by _caddy_
NTSC -> PAL?
« on: September 06, 2004, 06:42:51 PM »
is there any way of doing this as a mod?

i'm convinced there is, to be honest, but wouldnt know where to start
Logged
A1200 in original casing
Internal
4.3gb hard drive // 24x cdrom // clock port Hypercom1 // floppy drive
External
3 floppy drives, and a 3 Com Etherlink 3 PCMCIA Ethernet Card
 

Offline odin

  • Colonization had Galleons
  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 6796
    • Show only replies by odin
Re: NTSC -> PAL?
« Reply #1 on: September 06, 2004, 06:52:26 PM »
Which model? Amiga 500?
Logged
 

Offline _caddy_Topic starter

  • Full Member
  • ***
  • Join Date: Aug 2004
  • Posts: 116
    • Show only replies by _caddy_
Re: NTSC -> PAL?
« Reply #2 on: September 06, 2004, 07:04:41 PM »
a4000 t
Quote

odin wrote:
Which model? Amiga 500?
Logged
A1200 in original casing
Internal
4.3gb hard drive // 24x cdrom // clock port Hypercom1 // floppy drive
External
3 floppy drives, and a 3 Com Etherlink 3 PCMCIA Ethernet Card
 

Offline Castellen

Re: NTSC -> PAL?
« Reply #3 on: September 06, 2004, 08:11:58 PM »
In that case just set the motherboard jumper to PAL.
Can't remember it's number off hand, but it's fairly obvious when you see it.
That sets the default video mode, but you can set whatever mode you want using the screenmode prefs.
Logged
 

Offline adolescent

  • Hero Member
  • *****
  • Join Date: Sep 2003
  • Posts: 3056
    • Show only replies by adolescent
Re: NTSC -> PAL?
« Reply #4 on: September 06, 2004, 10:26:28 PM »
According to the big book it's J212.  Pin 1-2 NTSC, 2-3 PAL.
Logged
Time to move on.  Bye Amiga.org.  :(
 

Offline _caddy_Topic starter

  • Full Member
  • ***
  • Join Date: Aug 2004
  • Posts: 116
    • Show only replies by _caddy_
Re: NTSC -> PAL?
« Reply #5 on: September 06, 2004, 10:56:14 PM »
pretty cool

there is one on US ebay, going for cheap, if it costs less than £100 to import i may buy it, this is why i was asking
Logged
A1200 in original casing
Internal
4.3gb hard drive // 24x cdrom // clock port Hypercom1 // floppy drive
External
3 floppy drives, and a 3 Com Etherlink 3 PCMCIA Ethernet Card
 
Pages: [1]   Go Up
« previous next »