Welcome, Guest. Please login or register.

Author Topic: ReAmiga 3000  (Read 2718 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline ChuckyTopic starter

ReAmiga 3000
« on: September 16, 2019, 10:47:37 PM »
This is some teaserpictures of the ReAmiga 3000 that I will release at Amiga34.

Come to my table there. boards will be available. and working systems will be shown etc.  (and more!)



 

Offline matt3k

Re: ReAmiga 3000
« Reply #1 on: September 17, 2019, 02:50:42 AM »
Thanks so much Chucky!  Really appreciate and timely, my 3000D's are all failing. 

Please make a 3000T sometime :).
 

Offline Jeff

  • VIP / Donor - Lifetime Member
  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 1396
    • Show only replies by Jeff
Re: ReAmiga 3000
« Reply #2 on: September 17, 2019, 04:17:31 AM »
@matt3k
I offered to send him a faulty A3000T motherboard to use but he isn't interested in doing the tower. I understand as the A3000T is a pretty rare machine. The motherboard is HUGE and I don't think it would fit in any other case very easily.
 

Offline ChuckyTopic starter

Re: ReAmiga 3000
« Reply #3 on: September 17, 2019, 06:20:06 AM »
the 3000T is simply too large.  this board was a nightmare to do..
 

Offline Jeff

  • VIP / Donor - Lifetime Member
  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 1396
    • Show only replies by Jeff
Re: ReAmiga 3000
« Reply #4 on: September 18, 2019, 12:41:59 AM »
I know that there are a lot of people that really appreciate all of your efforts. I know I certainly do. After things calm down following your release I would be happy to read about some of the challenges that you faced in reproducing these boards. That is if you care to share your thoughts. Thanks Again!
 

Offline ChuckyTopic starter

Re: ReAmiga 3000
« Reply #5 on: October 15, 2019, 12:16:32 PM »
Ohh was so busy I forgot to add the link here: http://www.reamiga.info

where you now can download sprintfiles, gerbers etc