Thanks F1Lupo
For AmigaKit (you have likely contributed?) Additions/changes to the machines (from the 2017 post list above) include:
The A4000D ended up becoming the donor part of the ASCILL A4000D Rev B motherboard clone project.
An A500 Rev 5 joined the party from a Craigslist find in Virginia while planning my traveling route further south. Had mouse, PSU, spare floppy, A520 - $75. It gained an HC533+IDE DOM soon after.
A special TekMagic 060/60Mhz/64MB made for the A4000T Ultrasound medical machines now runs in the A4000T. This is my primary machine.
The previously owned A500 Rev 6/GVP-HD8 system gained a VXL-30/50Mhz with full populated memory board. An 18MB A500.
The A1000 now has a dual-Kickstart switcher, and an HC533+IDE DOM in it. A 10MB A1000.
A family was selling an A3000D (SuperKickstart ROMs, no HD) on AmiBay / pick up only, as part of an estate sale back in NJ where I used to live. I was going to be there in a week and a half. Keyboard, mouse, monitor, manuals - Friend picked it up for me - $50 total. Added 16MB of SCRAM ZIPs. This is my Software developer rig for FastPrep/ExpertPrep. Yup - 2019 dev work in progress to modernize it.
A TekMagic T-REX II/128MB was acquired. Runs nice in the A4000D, and still tweaking it. SCSI doesn't like the A4000T, and A3000's don't have the Int fix on them (yet)
A TekMagic A4040 was acquired / not working. Still working on it.
Free from a former enthusiast I helped online (he now has a kid and prefers emulation over trying to repair it) - he was extremely generous:
A2000 rev 6.2 with a 2MB ChipRAM module. It seems mostly fixed (testing, after battery damage clean up, new 68000 and sockets).
A4000D Rev B with battery damage. Caps and battery damaged parts are off, it's booting and stable with ChipRAM only. I have accelerators with RAM, so no biggie. Test Mule! At least until I get it transferred over to a clone A4000D Rev B from ACILL.
A P5 CSPPC/060/128MB came with the A4000D - I cleaned it up and it runs well when tested in the A400D or the A4000T. Yes, it was free.
A TekMagic 2060 also came with the above A2000. It's either happy with 128MB in page mode access, or 32MB in burst mode access. No biggie, as I use the latter, and just wow - it's fast (bustest memory benchmark, and the Fast SCSI all tops).
A CSA Derringer 030/25 also came in the pile. Pins bent/broken - are now fixed. Just need a SIMM for it. Looking at the 128MB hack now, and to see what it may need for the 50Mhz version - TBD/research this fall.
A CyberVision 64/3D card (have yet to poke at it).
An A2320 in the A2000 video slot - no definitive home yet.
A pair of PC TBC (one reportedly not working - going to a friend of mine)
Spectrum 28/24 repaired by ACILL (CAPS! - If you have GVP boards with the yellow caps sprinkled on them for basic noise filtering, get them done! Use modern SMD Electrolytic hybrids).
Another HC8 (Rev II). Soon to be given a ZIF ROM socket and will let me easily test GuruROMs again on it.
An Amiga port test rig
Keyboards and mice for the A4000 and A2000.
An A2620 and an A2630 joined the stable for test hardware against 3.1.4 and later betas.
A G-Force 040/33 was acquired, and yes the DPRC up-clock jumper works with no Z2 memory boards in the host. Need to replace the MACH socket/flaky.
A second TekMagic A2000 board was acquired (040), is not working. Still working on it.
Added Network cards: X-Surf 100 (A4000T), Ariadine II, Ameristar AE2000, AmigaNet Rev 1.2 (has Ethernet RJ45, in the Dev A3000)
The A1200's M-Tek accelerator started losing it's memory, so I replaced it with a GVP JAWS-II 030/50/32MB+A1291
Added two BigRAM Z3 256MB memory cards.
An A2090 was located for some testing I wanted to do.
An A3001 front card (borrowed from former GVP Co-worker)
Two GVP Impact HC Rev 3 cards (original series). Two of the very rare 128K AutoConfig I/O PIC type. Helped a lot with some of the 3.1.4 AutoConfig testing.
An A2091/2MB hacked to 14Mhz and part of my test bed for the GuruROM V6.16
A Golem FastSCSI / IDE that I have yet to truly figure out (low priority).
A Golden Gate 386 from Germany.
An A3640/Adapter to 68060.
Maxtor Magnito/Optical SCSI
SyQuest 44/88
Spare A1010
A rare A1020 5.25" drive
A rare GVP RAM8/0MB (no DIPs/original serial shrink)
Gotek with a rotating knob and OLED <- Love this. now to upgrade the others...
Still no A3000T or G-Force 040/40 prototype in it from the days at GVP, but I keep vigilant for it...