Delfina Flipper/ SCSI

[Miloo]

Ive just recieved my Delfina Flipper card and when i plug it in to the kickflash clockport the machine will not boot - just gives a white screen then goes to a black screen, when unplugged everythings ok?

The clockport cable is the right way around.
Has anyone had the same issue?

I have a scsi hd, sca to 68 pin connector and everything is plugged in correct, id set to 0. There is os3.9 on it and the machine will not boot from it either?

[Miloo]

Just had an email from Jens Schönfeld and he says the Delfina will not work on the Kickflash as this is meant for the flash expansion, only the subway will work on it.

[BinoX]

For a quick clockport addition, try adding a buddha IDE card

(Or an X-Surf if u dont have network already)

My delfina is added to my buddha card

[Miloo]

I got a catweasel zii so wouldnt need a buddha, Jens Schönfeld said he would send me an isdn surfer as the delfina will work on that.