Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: 060 Cyberstorm won' t boot off WB 3.1 Disks  (Read 772 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline pan1kTopic starter

  • Hero Member
  • *****
  • Join Date: Nov 2004
  • Posts: 841
    • Show only replies by pan1k
060 Cyberstorm won' t boot off WB 3.1 Disks
« on: August 10, 2008, 08:41:34 PM »
Is this normal? I had to put in my old 040 card just to get the machine to install WB 3.1. When the 060 card is in, I get a software error. Anyone shed some light on this?
Logged
A4K: \\\'060, Cyberstorm MKIII Cybervision 64/3D w/ Scandoubler, Buddha Flash XSurf, MP3@64, A4K: \\\'040, Toaster, Y/C, A1200: Apollo \\\'040, A1200 GVP \'030, A1200: Stock, A2000: 68K, Trump SCSI, Supra 8Mb, and Toaster 4K, A2500: \\\'030, GVP SCSI, Supra 8MB x2, Video Toaster, CD32, Minimig, Efika and Hopefully an A4000T soon!
 

Offline miles

  • Sr. Member
  • ****
  • Join Date: Feb 2002
  • Posts: 263
    • Show only replies by miles
    • http://homepages.ihug.co.nz/~miles.j
Re: 060 Cyberstorm won' t boot off WB 3.1 Disks
« Reply #1 on: August 10, 2008, 08:47:32 PM »
You need to install the 060 librarys first.

I use the MuTools libs from Aminet.
Logged
AMIGA 3000dT 060~66mhz RAM: *128*Mb/CyberVision64: *4*Mb/*18*Gb SCSI HDDs CD ROM CD-RW
Scanjet 5p/ZIP *100*/Canon BJC3000/Casio QV100 camera/Multiface 3/A2065/Toccata  
Operating system AMiGA Workbench 3.5.2
 

Offline dannyp1

  • Hero Member
  • *****
  • Join Date: Aug 2006
  • Posts: 664
    • Show only replies by dannyp1
Re: 060 Cyberstorm won' t boot off WB 3.1 Disks
« Reply #2 on: August 10, 2008, 10:44:54 PM »
What are the MuTools Libs and why do you use them?  I also couldn't find them when I just looked.  Are these better than the ones that were made for the card?

Dan
Logged
 

Offline miles

  • Sr. Member
  • ****
  • Join Date: Feb 2002
  • Posts: 263
    • Show only replies by miles
    • http://homepages.ihug.co.nz/~miles.j
Re: 060 Cyberstorm won' t boot off WB 3.1 Disks
« Reply #3 on: August 11, 2008, 12:07:10 AM »
It's in the MMULib.lha package on Aminet by Thomas Richter.

My 3000 is very stable using these libs, have had them for years.  There is other software in the package as well for debuging etc.  I used them with my 040 before I got the 060 as well.
Logged
AMIGA 3000dT 060~66mhz RAM: *128*Mb/CyberVision64: *4*Mb/*18*Gb SCSI HDDs CD ROM CD-RW
Scanjet 5p/ZIP *100*/Canon BJC3000/Casio QV100 camera/Multiface 3/A2065/Toccata  
Operating system AMiGA Workbench 3.5.2
 
Pages: [1]   Go Up
« previous next »