Welcome, Guest. Please login or register.

Author Topic: Amiga 1200 mother board connector question ???  (Read 1836 times)

Description:

0 Members and 1 Guest are viewing this topic.

  • Guest
Amiga 1200 mother board connector question ???
« on: December 20, 2002, 02:49:35 AM »
Hello All

Litle question .
I see on the A1200 mother board one IDE connection for the HD
one connection for the Disk drive .

But i see also litle be up right side from the both Roms another connection like IDE or disk drive .
What is this third connection on the mother board ??

Thank you :)
Later
Oliver
OS 3.9 PPC Rulez
 

Offline Paul_Gadd

  • Hero Member
  • *****
  • Join Date: Aug 2002
  • Posts: 1271
    • Show only replies by Paul_Gadd
    • http://elunatic.host.sk/start.html
Re: Amiga 1200 mother board connector question ???
« Reply #1 on: December 20, 2002, 02:57:14 AM »
Clock port which can be used for faster Serial, parallel port/s or for a sound card and you can also buy a board which goes on the clock port so you can use 4 devices on the port. or below is what was really intended for the port,



A1200 clock port interfaces:

PortJnr - 460Kbps serial interface
PortPlus - 2x460Kbps serial & 800kB/s parallel i/f
IOBlix-12S - 1.5Mbps serial interface
IOBlix-12P - EPP parallel port interface
The Prelude 1200 high performance audio card
 

  • Guest
Re: Amiga 1200 mother board connector question ???
« Reply #2 on: December 20, 2002, 03:16:06 AM »
hello

Wow thank for the infos :)))
Look good what type of sound card can i install on this port ??
And i be able to install a very good sound card with better performance that the normal sound of the amiga ?
That is a strange type of connection for a sound card its like IDE connection :)

later
Oliver
OS 3.9 PPC Rulez
 

Offline Paul_Gadd

  • Hero Member
  • *****
  • Join Date: Aug 2002
  • Posts: 1271
    • Show only replies by Paul_Gadd
    • http://elunatic.host.sk/start.html
Re: Amiga 1200 mother board connector question ???
« Reply #3 on: December 20, 2002, 03:28:44 AM »






The internal A1200 version

Four stereo inputs
One stereo output
Microphone pre-amplifier
Internal CD audio connector
Amiga audio passthrough
Sampling rate 8 - 64 kHz
 DSP for A-Law/ยต-Law/ADPCM
Multi channel mixer
100% Prelude software-compatible
Full AHI support
Includes Samplitude CD version
Extensive customer support/hotline
 
This soundcard will plug into the A1200's realtime clock port along with a connection terminal in the rear expansion booth. It has almost all the features of the 'big' Prelude, e.g. true 44100 and 48000 Hz fullduplex, a multi channel mixer, record level adjustment, etc.

The Prelude1200 comes with a special connection terminal made to fit inside the A1200's rear expansion bay. The audio output as well as three inputs are available externally. A fifth internal connector can be used to route CD-ROM audio through Prelude's mixer. One of the external inputs will be directly connected to the output as long as the card is uninitialised. This is ideal for connecting the original Amiga output so that you don't need to replug any cables just to play old bootloading games which do not use the soundcard driver.

In case you want to build your Prelude 1200 into a tower converted A1200 there's a special customized slot bracket available which will carry the connector board.
 

Offline jack

  • Newbie
  • *
  • Join Date: Feb 2002
  • Posts: 41
    • Show only replies by jack
Re: Amiga 1200 mother board connector question ???
« Reply #4 on: December 20, 2002, 03:31:50 AM »
Quote
Look good what type of sound card can i install on this port ??
And i be able to install a very good sound card with better performance that the normal


You can use Prelude version designed for clockport I have one and it's pretty good. It has better sound than internal  sound chip (Paula). It  has passthrough for amiga audio, cdrom and additonal one can be used for recording.
To play mp3 you'll need accelerator.

See more at the manufacturer's site:
ACT Prelude homepage

Jack.
 

  • Guest
Re: Amiga 1200 mother board connector question ???
« Reply #5 on: December 20, 2002, 03:38:30 AM »
hello :))

OK but is that possible to buy the prelude card ??
I mean is there some place where the card is avaible or that is a dream to expect to find one :) ?

Later
Oliver
OS 3.9 PPC Rulez
 

Offline jack

  • Newbie
  • *
  • Join Date: Feb 2002
  • Posts: 41
    • Show only replies by jack
Re: Amiga 1200 mother board connector question ???
« Reply #6 on: December 20, 2002, 04:09:04 AM »
Quote
OK but is that possible to buy the prelude card ??



Oook, that's a tough one, it used to be availble from main
Amiga-oriented distributors - that's how I got it, but quick
 search didn't find any now. May be you should try to
contact the manufacturer.

Jack.
 

Offline Piru

  • \' union select name,pwd--
  • Hero Member
  • *****
  • Join Date: Aug 2002
  • Posts: 6946
    • Show only replies by Piru
    • http://www.iki.fi/sintonen/
Re: Amiga 1200 mother board connector question ???
« Reply #7 on: December 20, 2002, 06:40:34 AM »
There is also another clockport soundcard for A1200: Delfina 1200.
 

 
This card is no longer produced though.

Individual Computers is supposed to produce some new Delfinas though, and these should include A1200 clockport support via special cable.
 

Offline Acill

Re: Amiga 1200 mother board connector question ???
« Reply #8 on: December 20, 2002, 08:27:42 AM »
If you dont mind ordering for the USA I know Software Hut has some in stock. I think they have a few used ones in stock as well. There web page is located at www.softhut.com
Proud Retired Navy Chief!

A4000T - CSPPC - Mediator
Powerbook G4 15", 17"
Powermac G5 2GHZ
AmigaOne X5000
Need Amiga recap or other services in the US? Visit my website at http://www.acill.com and take a look or on facebook at http://facebook.com/acillclassics
 

  • Guest
Re: Amiga 1200 mother board connector question ???
« Reply #9 on: December 21, 2002, 02:19:58 AM »
hello

Thanks again for all :)
Now i think i have enough informations about what is the clock port and what we can add on it :)).

Yes i will not let a unused port on my valuable A1200 :))) .Now that i have start to build it i must finish :) .

I will try one of these shop and for sure the one in the usa if the shop agree to send in europe for me np :) .


Later
Oliver
 

Offline JaXanim

  • Hero Member
  • *****
  • Join Date: Mar 2002
  • Posts: 1120
    • Show only replies by JaXanim
    • http://www.intuitionbase.com/waveguide/home.html
Re: Amiga 1200 mother board connector question ???
« Reply #10 on: December 21, 2002, 03:42:37 PM »
Second hand Prelude cards appear on AmiBench (www.amibench.org) now
and then, so don't forget to check it out. That's how I got mine and
you'll be surprised how much you can save.

Cheers,

JaXanim
http://waveguide.v-2-1.net
Be inspired! It\\\'s back!