Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: StevenJGore on June 13, 2003, 03:31:43 PM

Title: Internal flicker-fixer/scan-doubler for CD32?
Post by: StevenJGore on June 13, 2003, 03:31:43 PM

Does an internal flicker-fixer/scan-doubler for an A1200 also work with a CD32?

I'm referring to Power Computing's internal ff/sd that clips over the Lisa and Alice chips.

Since the CD32 also has these chips, I would have thought that in theory it would be fine.

Anyone tried it or know about it?

Thanks!
Steve.

Title: Re: Internal flicker-fixer/scan-doubler for CD32?
Post by: Brian on June 13, 2003, 04:48:25 PM

In theory it sounds about right... and with Lisa and Alice being so close to each other on the CD32 motherboard I don't think you'll have any trouble with cable lengt when fitting it either. I doubt there's any danger in trying it but question is if one is willing to take a chanse cause that's what it is. ;-)

Title: Re: Internal flicker-fixer/scan-doubler for CD32?
Post by: kolla on June 13, 2003, 06:04:35 PM

Also a clock port adapter would be cool, too bad the SX32 didnt come with it.

With a clockport, subway and USB ethernet adapter, and ofcourse ethernet-adapter support in Poseidon, the CD32 would finally be able to hook onto the network :)

Title: Re: Internal flicker-fixer/scan-doubler for CD32?
Post by: JurassicCamper on June 13, 2003, 06:24:25 PM

If that doesn't work you can always cut a small hole in the fmv cover
at the back and fit a 23 PIN D type connector.
Just solder the correct pins for
R
G
B
GND
V sync
H sync
To the FMV connector
Then use an external scandoubler.