How do I find out how much chip ram and fast ram I have?
I've replaced the file with the original in the WHDLOAD folder and that message still appears.
I went into the data folder which is in the settlers folder and was looking through the files and saw a file saying "settlers" so I double clicked on it and the game loaded up. But when it got to the copy protection part it wouldn't let me carry on. Like I needed to enter the correct symbols in order to carry on.
You should be clicking on the "Settlers" icon, you shouldn't be going into the data drawer. What is in there are all the files from the floppy disks (2), and so the crack that enables you to select any symbols to play (implemented by c:WHDLoad along with the file Settlers.slave) will not work.
One question I have, is do you have your MaxTransfer value set correctly for ALL your CF hard drive partitions? This is important for CF cards plugged into the onboard IDE of the 1200 and 600.
You can check this with the HDToolBox program which should be stored in your "SYS:Tools" drawer. It should be set to "0x1FE00". Don't alter anything else and you should be fine. I will not be held responisble for any data loss that may incur from incorrect usage of HDToolBox.
If it wasn't already set correctly, you must transfer the settlers zip archive again to your A1200, and unzip again, replacing your current Settlers drawer (which maybe corrupted due to the MaxTransfer being wrong initially).
P.S. if your MaxTransfer was wrong, re-install WHDLoad as well.