Welcome, Guest. Please login or register.

Author Topic: WinUAE and Easy CD Creator DeLuxe problem  (Read 2698 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline CoderTopic starter

  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 2996
    • Show only replies by Coder
    • http://www.amiga.nl
WinUAE and Easy CD Creator DeLuxe problem
« on: January 03, 2003, 02:14:53 PM »
Hi,

I got Easy CD Creator 5 Deluxe installed and when I run WinUAE with UAE scsi.device enabled
it wil not start. I get the error "Cannot open "uaescsi.device unti 0" I know it's caused
by Easy CD Creator. Is there a fix for or a solution?

Coder
Check it out - I found the ass-end!
 

Offline T_Bone

  • Hero Member
  • *****
  • Join Date: Jun 2002
  • Posts: 5124
    • Show only replies by T_Bone
    • http://www.amiga.org/userinfo.php?uid=1961
Re: WinUAE and Easy CD Creator DeLuxe problem
« Reply #1 on: January 03, 2003, 02:19:12 PM »
using ASPI layer?
this space for rent
 

Offline CoderTopic starter

  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 2996
    • Show only replies by Coder
    • http://www.amiga.nl
Re: WinUAE and Easy CD Creator DeLuxe problem
« Reply #2 on: January 03, 2003, 02:21:08 PM »
@T_Bone

Yes. That's the prob, right?

Coder
Check it out - I found the ass-end!
 

Offline Paul_Gadd

  • Hero Member
  • *****
  • Join Date: Aug 2002
  • Posts: 1271
    • Show only replies by Paul_Gadd
    • http://elunatic.host.sk/start.html
Re: WinUAE and Easy CD Creator DeLuxe problem
« Reply #3 on: January 03, 2003, 02:22:42 PM »
The ASPI drivers Easy CD Creator 5 installs is the problem which makes UAE not detect the drive/s properly,

Remove the ASPI drivers then get the latest ones, install them and the problems should go away,

Had that and the same problem with Accoustica mp3 burner,

Just to add it is a well known problem with Roxio products to make other cd burning programs or programs what use the cd drive to not work properly untill you reinstall the ASPI drivers.

Only Roxio makes your nightmares come true  :-D
 

Offline CoderTopic starter

  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 2996
    • Show only replies by Coder
    • http://www.amiga.nl
Re: WinUAE and Easy CD Creator DeLuxe problem
« Reply #4 on: January 03, 2003, 02:33:44 PM »
I installed them and offcourse I need to reboot. That's Windows. But it should work then. I wil let you know. Thnx for the help everyone.

Coder
Check it out - I found the ass-end!
 

Offline CoderTopic starter

  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 2996
    • Show only replies by Coder
    • http://www.amiga.nl
Re: WinUAE and Easy CD Creator DeLuxe problem
« Reply #5 on: January 03, 2003, 02:48:24 PM »
It did not work. Hmmmmm. I installed v4.70 but I gues I need newer ones.

Coder
Check it out - I found the ass-end!
 

Offline Paul_Gadd

  • Hero Member
  • *****
  • Join Date: Aug 2002
  • Posts: 1271
    • Show only replies by Paul_Gadd
    • http://elunatic.host.sk/start.html
Re: WinUAE and Easy CD Creator DeLuxe problem
« Reply #6 on: January 03, 2003, 02:51:44 PM »
Make sure you deleted every trace of ASPI drivers on the machine then reboot, then first of all install the ones that came with the Windows your using (which i still use the ones that come with 98SE),

Try that before installing Adaptecs new ones,

I used to run Easy CD Creator 5 Platinum and it was a good program but the problems it installs then leaves behind after uninstalling is a complete nightmare and a joke, i now use Nero instead.
 

Offline CoderTopic starter

  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 2996
    • Show only replies by Coder
    • http://www.amiga.nl
Re: WinUAE and Easy CD Creator DeLuxe problem
« Reply #7 on: January 03, 2003, 03:00:39 PM »
@Paul_Gadd

Nero does not work with my burner. But Easy CD does.

Quote
Make sure you deleted every trace of ASPI drivers on the machine then reboot


Your talking about manually remove certain dll files?

Coder
Check it out - I found the ass-end!
 

Offline jd997uk

  • Hero Member
  • *****
  • Join Date: Mar 2002
  • Posts: 595
    • Show only replies by jd997uk
Re: WinUAE and Easy CD Creator DeLuxe problem
« Reply #8 on: January 03, 2003, 03:01:08 PM »
@Coder
Quote
Is there a fix for or a solution?

Yup. Delete EasyCD Creator and install Nero!
Actually, I'm not joking either. Easy/Roxio (as reported elsewhere) is a nasty piece of work. I use Nero to burn everything from CD's to DVD's and it just plain works.
I've never been happy allowing EasyCD anywhere near a machine of mine since the almighty F#(k up that happened with WinXP :~/

What Burner do you have? Nero is updated virtually every week, I'd be very suprised if your burner isn't covered.


-john (edit 3/1/02 15.06 GMT)
Don\\\'t panic - bite the towel.
 

Offline Paul_Gadd

  • Hero Member
  • *****
  • Join Date: Aug 2002
  • Posts: 1271
    • Show only replies by Paul_Gadd
    • http://elunatic.host.sk/start.html
Re: WinUAE and Easy CD Creator DeLuxe problem
« Reply #9 on: January 03, 2003, 03:02:09 PM »
@coder

State what windows your using would help,

Not deleting dll files but the system files which are left behind when you might think you have uninstalled/removed the aspi drivers.
 

Offline CoderTopic starter

  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 2996
    • Show only replies by Coder
    • http://www.amiga.nl
Re: WinUAE and Easy CD Creator DeLuxe problem
« Reply #10 on: January 03, 2003, 03:06:38 PM »
I got Windows 98. I just downloaded a newer version of the aspi drivers. I will give that a go.

About Nero, some weeks ago I tried the latest version wich did not work. I got a Acer CRW4432A.

Coder
Check it out - I found the ass-end!
 

Offline Paul_Gadd

  • Hero Member
  • *****
  • Join Date: Aug 2002
  • Posts: 1271
    • Show only replies by Paul_Gadd
    • http://elunatic.host.sk/start.html
Re: WinUAE and Easy CD Creator DeLuxe problem
« Reply #11 on: January 03, 2003, 03:09:29 PM »
WIN98\SYSTEM\IOSUBSYS\APIX.VXD  
WIN98\SYSTEM\WINASPI.DLL  
WIN98\SYSTEM\WNASPI32.DLL  
and ONE of the following two files
WIN98\SYSTEM\ASPIENUM.VXD (this is the file that comes from Adaptec)
WIN98\ASPI2HLP.SYS (this is the file that comes with Win95)

Use find and remove all them,

 click HERE to download the win98 files.

Extract winaspi.dll, wnaspi32.dll, and aspienum.vxd into your system directory.
Extract sparrow.mpd and apix.vxd into your iosubsys directory in your system directory.
These are the original Windows95/98/ME distribution files - this is to get you back to installed Windows status
Extract and run aspi32.exe, this will update the files to 4.06 (1021) status
Extract and run aspichk.exe, this will help you see if all the files are matched and are the correct versions.
If it still doesn't work, extract the wnaspi32_nero.dll file into your Translator folder, and rename it wnaspi32.dll,

I had to do that twice after installing Roxio`s wonderfull product.
 

Offline CoderTopic starter

  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 2996
    • Show only replies by Coder
    • http://www.amiga.nl
Re: WinUAE and Easy CD Creator DeLuxe problem
« Reply #12 on: January 03, 2003, 03:39:28 PM »
Hi Paul_Gadd,

Well, I don't use WinUAE so much (the cdrom part) so I can manage. And I bet my Windows gets screwed up. LOL. And I will try a newer nero version again soon. If I remove Easy CD Creator I am saved also. :-) I had both working some time ago but then I had Easy CD Creator version 3.x

Thnx for your help.

Coder
Check it out - I found the ass-end!
 

Offline jd997uk

  • Hero Member
  • *****
  • Join Date: Mar 2002
  • Posts: 595
    • Show only replies by jd997uk
Re: WinUAE and Easy CD Creator DeLuxe problem
« Reply #13 on: January 03, 2003, 04:05:13 PM »
@Coder

Quote
I got a Acer CRW4432A.


This has been supported by Nero since Ver 4.4 so it _should_ work.
As stated on other posts, it has to be the ASPI drivers, hopefully Paul's advice on uninstalling and re-installing will sort you problems out.

-john
Don\\\'t panic - bite the towel.
 

Offline DethKnight

  • Hero Member
  • *****
  • Join Date: Mar 2002
  • Posts: 509
    • Show only replies by DethKnight
Re: WinUAE and Easy CD Creator DeLuxe problem
« Reply #14 on: January 03, 2003, 04:38:21 PM »
[/quote]Only Roxio makes your nightmares come true[/quote]

lol, don't I know it, formerly a peecee repairman, I converted countless individuals to nero4 or cdmate.

even a few to (IMHO the traitorous) asimware's hotburn.
 
wanted; NONfunctional A3K keyboard wanted