Welcome, Guest. Please login or register.

Author Topic: Escom A1200 and df1: issues  (Read 3397 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline bellerTopic starter

  • S.A.C.C.
  • Hero Member
  • *
  • Join Date: Dec 2004
  • Posts: 657
    • Show only replies by beller
Escom A1200 and df1: issues
« on: May 30, 2019, 06:33:32 PM »
Since I received my A1200 in 2008 I have had an issue with df1:  Using a known good drive the A1200 says there is a drive df1: but fails to recognize that a disk is in the drive.

Yesterday I tried using diskchange to see if that might help get the drive up and recognized.  No luck but then I noticed something funny.  Everytime I sent the diskchange command an icon for the disk in the drive would flash on the screen and disappear.

I've looked with no luck...anyone have a clue as to the problem and a fix?

 

Offline SACC-guy

Re: Escom A1200 and df1: issues
« Reply #1 on: May 31, 2019, 03:48:34 AM »
You say a "known good drive'

All old floppy drives have the disk pin sensors "stick". which leads to found/not found
 

Offline bellerTopic starter

  • S.A.C.C.
  • Hero Member
  • *
  • Join Date: Dec 2004
  • Posts: 657
    • Show only replies by beller
Re: Escom A1200 and df1: issues
« Reply #2 on: May 31, 2019, 06:22:52 AM »
The drive works fine on my A4000 A500 and A600....
 

Offline SACC-guy

Re: Escom A1200 and df1: issues
« Reply #3 on: May 31, 2019, 07:57:45 AM »
Okay then..

power supply, try a another one?
 

Offline bellerTopic starter

  • S.A.C.C.
  • Hero Member
  • *
  • Join Date: Dec 2004
  • Posts: 657
    • Show only replies by beller
Re: Escom A1200 and df1: issues
« Reply #4 on: May 31, 2019, 02:09:52 PM »
It’s the A1200...been this way since I bought it.  I’m using a new Ray Carlsen power supply....
 

Offline SACC-guy

Re: Escom A1200 and df1: issues
« Reply #5 on: June 03, 2019, 12:20:13 AM »
tag! I'm out of ideas..

Maybe Chris  or Paul figure it out?
 

Offline bellerTopic starter

  • S.A.C.C.
  • Hero Member
  • *
  • Join Date: Dec 2004
  • Posts: 657
    • Show only replies by beller
Re: Escom A1200 and df1: issues
« Reply #6 on: June 03, 2019, 06:22:54 AM »
Thanks.  Looks like it's a port connection issue....never opened the 1200.  Maybe it's something simple....
 

Offline paul1981

Re: Escom A1200 and df1: issues
« Reply #7 on: June 04, 2019, 09:48:22 PM »
Since I received my A1200 in 2008 I have had an issue with df1:  Using a known good drive the A1200 says there is a drive df1: but fails to recognize that a disk is in the drive.

Yesterday I tried using diskchange to see if that might help get the drive up and recognized.  No luck but then I noticed something funny.  Everytime I sent the diskchange command an icon for the disk in the drive would flash on the screen and disappear.

I've looked with no luck...anyone have a clue as to the problem and a fix?

What else configuration wise besides an extra floppy does this A1200 have? I'm thinking perhaps it's some software on your hard disk interfering with DF1: possibly...like anticlick or even something in DEVS:DOSDrivers. Or, could be a resident module but that's doubtful. Have you tried a cold boot into Workbench via the Workbench floppy disk (3.0 or 3.1 or 2.0 or 2.1) and see if the problem remains?
 

Offline bellerTopic starter

  • S.A.C.C.
  • Hero Member
  • *
  • Join Date: Dec 2004
  • Posts: 657
    • Show only replies by beller
Re: Escom A1200 and df1: issues
« Reply #8 on: June 05, 2019, 05:38:48 AM »
I received the system NOS from AmigaKit in 2006 and df1: was non functional from the start. I'm putting in new Kickstarts and an Indivision over the weekend.  I'll strip it down and remove the Blizzard to see if df1: comes back from the dead.  Never opened this machine...I have booted from floppy.  No change.
« Last Edit: June 05, 2019, 05:42:20 AM by beller »
 

Offline bellerTopic starter

  • S.A.C.C.
  • Hero Member
  • *
  • Join Date: Dec 2004
  • Posts: 657
    • Show only replies by beller
Re: Escom A1200 and df1: issues
« Reply #9 on: June 07, 2019, 08:21:16 PM »
No...the blizzard isn't the issue.  I stripped the 600 down and still no response from df1: which is reported as mounted.  Must be a trace on the port.

 

Offline scuzzb494

Re: Escom A1200 and df1: issues
« Reply #10 on: June 12, 2019, 01:44:47 AM »
Odd question but does your DF0: main computer floppy drive have a little green light just inside the disk slot. [ not your Df1: obviously but your DF0: ]

scuzz

Offline bellerTopic starter

  • S.A.C.C.
  • Hero Member
  • *
  • Join Date: Dec 2004
  • Posts: 657
    • Show only replies by beller
Re: Escom A1200 and df1: issues
« Reply #11 on: June 12, 2019, 05:38:21 PM »
Odd question but does your DF0: main computer floppy drive have a little green light just inside the disk slot. [ not your Df1: obviously but your DF0: ]

scuzz


I've seen pictures of those but my df0: doesn't have an inner green light....
 

Offline paul1981

Re: Escom A1200 and df1: issues
« Reply #12 on: June 14, 2019, 10:58:31 AM »
Odd question but does your DF0: main computer floppy drive have a little green light just inside the disk slot. [ not your Df1: obviously but your DF0: ]

scuzz

Out of curiosity, where were you going with this? Those drives are HD drives converted for DD use. Could that affect DF1 in any way?
 

Offline bellerTopic starter

  • S.A.C.C.
  • Hero Member
  • *
  • Join Date: Dec 2004
  • Posts: 657
    • Show only replies by beller
Re: Escom A1200 and df1: issues
« Reply #13 on: June 14, 2019, 03:55:26 PM »
Odd question but does your DF0: main computer floppy drive have a little green light just inside the disk slot. [ not your Df1: obviously but your DF0: ]

scuzz

Out of curiosity, where were you going with this? Those drives are HD drives converted for DD use. Could that affect DF1 in any way?

I was trying to find out if this has generally been a problem with these French made systems and, if so, if there was a fix.  Looks like it isn't common.  From tinkering I've found the sensor which recognizes a disk change or even a disk is inserted isn't working.  Manually doing a diskchange command results in a brief flash of the disk icon on the screen,.

I've stripped out the Blizzard and PCMCIA cards.  I think I'm down to something on the port is broken....
 

Offline bellerTopic starter

  • S.A.C.C.
  • Hero Member
  • *
  • Join Date: Dec 2004
  • Posts: 657
    • Show only replies by beller
Re: Escom A1200 and df1: issues
« Reply #14 on: June 14, 2019, 08:42:54 PM »
In the process of installing an FPU in my Blizzard this morning I noticed the DF0: was loose.  I removed the drive and installed a drive I had purchased from AmigaKit for the A600 which is in the shop.  I installed this drive in the A1200 and, surprise surprise, the df1: is now working!!  13 years and I finally fixed it!  looks like I'm tossing that Panasonic and ordering another drive!

« Last Edit: June 14, 2019, 08:45:53 PM by beller »