Cybervision 64/3d scandoubler and micronik z3 busboard.

[AmiJIm]

Hello there,i am trying to revive my amigas and it is time to check my a1200 with a cybervision 64/3d with a scandoubler in a micronik tower with a z3 busboard with a video slot activated with the microniks adaptors connected on the amiga chipset.The problem is that i dont remember if the scandoubler works in a micronik a1200 busboard  video slot.In the early start up sequence i can see the id of a working c64/3d but all i get from the scandoubler is a black screen with active 31khz signal.So first of all i would like to ask you if anyone has used a micronik a1200 busboard with a phase5 scandoubler .thank you.

[AmiJIm]

Dear Amijim of 2008 , i am Amijim of 2020 and i would like to remind you that there was the typical broken resistor of the scan doubler and you only had to solder a bridge over it.And yes the cybervision scan doubler works on a micronik busboard.