Welcome, Guest. Please login or register.

Author Topic: Amiga 2000 Main board cleaning  (Read 2348 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline trekiejTopic starter

Amiga 2000 Main board cleaning
« on: August 08, 2019, 03:25:00 AM »
Hello.
I am looking to fix a mother board that had a leaky battery.
I have used Alcohol and Vinegar on it already.
It still has some green on it.
Do I need to just scrub it more or what?
Thanks.
Amiga 2000 Forever :)
Welcome to the Planar System.
 

Offline giZmo350

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: Apr 2005
  • Posts: 2055
  • Country: 00
  • Thanked: 29 times
  • Gulfport, Miss
    • Show only replies by giZmo350
Re: Amiga 2000 Main board cleaning
« Reply #1 on: August 08, 2019, 04:22:36 AM »
Do I need to just scrub it more or what?

Yup! Scrub it till it bleeds! LOL.....  Seriously, ya gotta neutralize the damage. Period! If there is any damage under any sockets, the sockets need to be removed and replaced (R&R). Any trace damage must be repaired. Brutal! I know.   8)
A500: 2MB Chip, 8MB Fast, IndiECS, MiniMegi, IDE4ZorroII on Z-500, KS1.3/KS3.1, WB3.1&BWB
 
A2000HD: 2MB Chip, 128MB Fast, P5:Blizz 2060@50MHz, PCD-50B/4GBCF, XSurf100, RapidRoad, IndiECS, Matze RTG, MiniMegi, CD-RW, SunRize AD516, WB3.9
 
A1200: 2MB Chip, 64MB Fast, 4GBCF, GVP Typhoon 030 @40MHz w/FPU, Subway USB, EasyNet Ethernet, Indi AGA MKI, FastATA MK-IV, Internal Slim CD/DVD-RW, WB3.5

Surfing The Web With AMIGA Is Fun Again!
 

Offline trekiejTopic starter

Re: Amiga 2000 Main board cleaning
« Reply #2 on: August 08, 2019, 09:40:35 AM »
I still have a lot to check. I do not know for sure just yet. The battery I removed looked fairly new.
Amiga 2000 Forever :)
Welcome to the Planar System.
 

Offline trekiejTopic starter

Re: Amiga 2000 Main board cleaning
« Reply #3 on: August 17, 2019, 01:23:37 AM »
Ugh, I guess it is getting to be Dremel time.
Amiga 2000 Forever :)
Welcome to the Planar System.
 

Offline RetroPassion

Re: Amiga 2000 Main board cleaning
« Reply #4 on: September 03, 2019, 03:31:55 PM »
Green screen means you have a chip ram issue, so cleaning will only remove the damage which is a good start. The issue will be down to damaged tracks which can be checked for continuity with a multimeter and a circuit diagram. Or you can try reseating the Agnus chip and the Gary chips. Any pics????
Offering complete Amiga recapping  services including add-ons, mods. We also cater for other makes and models of consoles and computers.
 

Offline trekiejTopic starter

Re: Amiga 2000 Main board cleaning
« Reply #5 on: September 03, 2019, 06:40:08 PM »
This board does not have any Amiga Chips or 68000 CPU.

I do have a lot of pictures and am looking to post them on my blog.

The copper traces are shiny and still needing to remove some sockets.

I had to stop and fix my De-solder Unit. The old handle is trying to break up.
JB Weld looks like it is holding it together.

Ugh, I need more money to fix the traces.




Amiga 2000 Forever :)
Welcome to the Planar System.
 

Offline thebajaguy

  • Newbie
  • *
  • Join Date: May 2017
  • Posts: 34
  • Country: us
  • Gender: Male
    • Show only replies by thebajaguy
Re: Amiga 2000 Main board cleaning
« Reply #6 on: September 04, 2019, 04:24:19 AM »
AmigaWiki has the schematics if you have a 6.2.  It's nearly the same to the left of the ChipRAM buffers on the 4.x, too.

Make a spreadsheet of common address and data lines, and common clock and bus signal lines, checking off each one from the CPU socket to the 86 pin slot, expansion bus buffers, ROM, and the ChipRAM buffers.  Mark the bad traces in your sheet with color.

At repair time, run the thin wires on the underside.

Save the clock schematics page for last - it's not critical.
Former GVP Tech Support 1989-1993 - Bloodied in the original trenches of the Amiga Wild Wild West.
 

Offline trekiejTopic starter

Re: Amiga 2000 Main board cleaning
« Reply #7 on: September 04, 2019, 12:24:46 PM »
@thebajaguy
My working A2000 needs more testing.
The corroded spot is more localized.
I have put Vinegar on the spot a couple times and let dry on its own.
Wednesday night, I need to clean it again and see how bad it is.
Maybe only three lines are bad.
I still need to check all ports.
Amiga 2000 Forever :)
Welcome to the Planar System.
 

Offline thebajaguy

  • Newbie
  • *
  • Join Date: May 2017
  • Posts: 34
  • Country: us
  • Gender: Male
    • Show only replies by thebajaguy
Re: Amiga 2000 Main board cleaning
« Reply #8 on: September 04, 2019, 11:32:24 PM »
Vinegar = An Acid, used to neutralize the battery leakage (which is a Base, in terms of pH)
An alternative is to use lemon juice - again, an acid.

Soak that under chip parts if you suspect some leakage got under it.
An old toothbrush is a good idea for scrubbing. 
Sockets with green in/on them should be replaced.  You can't get in the sockets well, and they will likely continue to corrode.
Badly affected chips with green are also candidates for replacement, but if not in sockets, clean as best you can, and save for later.

When done, rinse with isopropyl alcohol.  This negates much of the acid and neutralization reaction, and brings the acid/base value much closer (but not exactly) to a pH of 7 (neutral).  A 70% solution isopropyl alcohol is good enough, with the benefit that the alcohol evaporates, and the remaining 30% of that is pure denatured water - let that dry.  Avoid tap water for final rinsing if you know it tends to have a high mineral content (but it's better than nothing if you don't have the alcohol handy).  Denatured water from the store is also an option (exact neutral pH of 7, no minerals). 

Check also that any through-hole solder point (a via) conducts when it transfers the signal to the other side of the PCB.
« Last Edit: September 04, 2019, 11:37:32 PM by thebajaguy »
Former GVP Tech Support 1989-1993 - Bloodied in the original trenches of the Amiga Wild Wild West.
 

Offline trekiejTopic starter

Re: Amiga 2000 Main board cleaning
« Reply #9 on: July 31, 2021, 12:14:08 AM »
I cleaned it to this point.
I think the Green is gone from the battery leak.
Amiga 2000 Forever :)
Welcome to the Planar System.
 

Offline trekiejTopic starter

Re: Amiga 2000 Main board cleaning
« Reply #10 on: July 31, 2021, 12:15:53 AM »
Getting the frost off of it is another challenge.
Amiga 2000 Forever :)
Welcome to the Planar System.