Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Indivision ECS in amiga 500  (Read 300 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline ChartusTopic starter

  • Full Member
  • ***
  • Join Date: Jun 2008
  • Posts: 133
    • Show only replies by Chartus
Indivision ECS in amiga 500
« on: April 15, 2016, 05:05:27 AM »
Who has an indivision ECS in there 500.   Whats the revision of the MB ?  I tried putting one in a  Rev 5 mb with no luck.  Also broke it when I pressed down too hard.  (a little inductor on the bottom broke off and  I can't find out the value to get a replacement)

I just want to know if you had any problems when you installed it.
Logged
 

Offline smf

Re: Indivision ECS in amiga 500
« Reply #1 on: April 15, 2016, 07:32:43 AM »
I have used mine in A500, and then moved it to an A2000 and now it sits in an A600, no problem whatsoever with the installation. The revision i used of the A500 mobo is 6A iirc.
Logged
 

Offline smf

Re: Indivision ECS in amiga 500
« Reply #2 on: April 15, 2016, 07:34:32 AM »
If you want to fix it yourself you could try to contact Jens and ask about the component, he was very helpfull with the component details when i contacted him and asked about an X-surf i was attempting to repair.
Logged
 

Offline Oldsmobile_Mike

Re: Indivision ECS in amiga 500
« Reply #3 on: April 15, 2016, 09:05:59 AM »
A500, 6A, and A2000, 6.4, no problems in either.
Logged
Amiga 500: 2MB Chip|16MB Fast|30MHz 68030+68882|3.9|Indivision ECS|GVP A500HD+|Mechware card reader + 8GB CF|Cocolino|SCSI DVD-RAM
Amiga 2000: 2MB Chip|136MB Fast|50MHz 68060|3.9|Indivision ECS + GVP Spectrum|Mechware card reader + 8GB CF|AD516|X-Surf 100|RapidRoad|Cocolino|SCSI CD-RW
 Amiga videos and other misc. stuff at https://www.youtube.com/CompTechMike/videos
 
Pages: [1]   Go Up
« previous next »