MCP Assignwedge guru

[Ancalimon]

This was working properly before.

When assignwedge asks to mount,assign,cancel, etc,  If I select cancel, I get a guru.

Task:  0x09A9E758 Workbench
Error: 0x01000000F "recovereable" by: ExecLibrary
Cause: Memory header not located

Tried snoopdos:

The only fails are the following:

ReqAttack   Logos/billy
datatypes/ilbm44.prefs
classes/datatypes/ilbm44.prefs

Here is the startup-sequence:

Code: [Select]

;PsdLoadModule DEVS:input.device QUIET ;Added by Poseidon-Installer
; $VER: Startup-Sequence_HardDrive 45.1 (25.11.00)
; Startup-Sequence for hard drive systems

Blizkick * EXTRESBUF=900000 MODULE romupdate.idtag exec.library FastFileSystem FileSystem.resource scsi.device "NCR scsi.device" ram-handler input.device layers.library console.device Shell-Seg dos.library bootmenu trackdisk.device battmem.resource misc.resource card.resource potgo.resource NOPUPREBOOT QUIET

;Blizkick * EXTRESBUF=900000 MODULE romupdate.idtag morelibspace_module exec.library_45.20 FastFileSystem FileSystem.resource scsi.device "NCR scsi.device" ram-handler input.device console.device Shell-Seg dos.library bootmenu trackdisk.device battmem.resource misc.resource card.resource potgo.resource rapidroadxs100usb.device poseidon.library hub.class hid.class bootmouse.class PsdStackloader NOPUPREBOOT QUIET

;Blizkick * EXTRESBUF=650000 MODULE romupdate.idtag exec.library_45.25.28 ramlib_40.3 graphics.library_v40.26b3 intuition.library_40.86b7 FastFileSystem FileSystem.resource scsi.device "NCR scsi.device" ram-handler input.device console.device Shell-Seg dos.library bootmenu trackdisk.device battmem.resource misc.resource card.resource potgo.resource NOPUPREBOOT QUIET

;Blizkick * EXTRESBUF=650000 MODULE romupdate.idtag exec.library_45.24 FastFileSystem FileSystem.resource scsi.device "NCR scsi.device"
;ram-handler console.device Shell-Seg bootmenu trackdisk.device dos.library battmem.resource misc.resource card.resource potgo.resource
;ramlib_40.3 graphics.library_v40.26b3 intuition.library_40.86b7 workbench.library layers.library input.device morelibspace_module NOPUPREBOOT QUIET

C:Safe RENRAM OWNOUT MOUNTSIZE=6684     ;Checks for viruses
;C:morelibspace
C:SetPatch NOROMUPDATE QUIET
;C:SetPatch QUIET

C:PatchControl
;mcpramlibpatch
StackAttack

;CyReq ;one of most important patches in your OS!

;run <>NIL: C:PatchASL

C:TagLiFE

C:Version >NIL:
C:AddBuffers >NIL: DF0: 15
FailAt 21

C:MakeDir RAM:T RAM:Clipboards; RAM:ENV RAM:ENV/Sys ;replaced by env-handler
;C:Copy >NIL: ENVARC: RAM:ENV ALL NOREQ ;replaced by env-handler

Resident >NIL: C:Assign PURE
Resident >NIL: C:Execute PURE

L:env-handler ADDVOLNODE
;Assign >NIL: ENV: RAM:ENV ;replaced by env-handler
Assign >NIL: T: RAM:T
Assign >NIL: CLIPS: RAM:Clipboards
Assign >NIL: REXX: S:
Assign >NIL: PRINTERS: DEVS:Printers
Assign >NIL: KEYMAPS: DEVS:Keymaps
Assign >NIL: LOCALE: SYS:Locale
Assign >NIL: LIBS: SYS:Classes ADD
Assign >NIL: HELP: LOCALE:Help DEFER
Assign >NIL: "Ram Disk:" RAM:

;run >NIL: C:SmartWin
C:MCP
C:LayersAntiHack

BindDrivers
C:Mount >NIL: DEVS:DOSDrivers/~(#?.info)

C:LoadMonDrvs

;IF EXISTS DEVS:Monitors
;  IF EXISTS DEVS:Monitors/VGAOnly
;    DEVS:Monitors/VGAOnly
;  EndIF

;  C:List >NIL: DEVS:Monitors/~(#?.info|VGAOnly) TO T:M LFORMAT "DEVS:Monitors/%s"
;  Execute T:M
;  C:Delete >NIL: T:M
;EndIF

SetEnv Language "english"
SetEnv Workbench $Workbench
SetEnv Kickstart $Kickstart
UnSet Workbench
UnSet Kickstart

C:AddDataTypes REFRESH QUIET

;Assign AfA_OS_Libs: SYS:System/AfA_OS_Libs
;C:AfA_OS_Loader

;IF NOT EXISTS ENV:afa/replacevisualprefs
   Run >NIL: WB39:System/VisualPrefs/TitleShadow
   Run >NIL: WB39:System/VisualPrefs/VisualPrefs
   Run >NIL: WB39:System/VisualPrefs/TRAP ALL
;ENDIF

;C:Wait 1
C:IPrefs

WB39:System/VisualPrefs/FPPrefs

C:ConClip

Path >NIL: RAM: C: SYS:Utilities SYS:Rexxc SYS:System S: SYS:Prefs SYS:WBStartup SYS:Tools SYS:Tools/Commodities

;IF NOT EXISTS ENV:afa/replacebirdie
   C:Wait 1
   Run >NIL: SYS:System/VisualPrefs/Birdie ? <Env:Birdie.prefs
;ENDIF

SYS:System/REXXMast >NIL:

SYS:C/MakeLink RAM:disk.info ENVARC:SYS/def_RAM.info SOFT


IF EXISTS S:User-Startup
  Execute S:User-Startup
EndIF

Resident Execute REMOVE
Resident Assign REMOVE

C:WBCtrl IMT=FAST MNL=107

;OutlineIconText
;ShadowIconText
DOnoColorMapping

StackAttack AUTO
C:LoadWB
EndCLI >NIL:


[Ancalimon]

Found the reason. It is MCP New Gadtools option. It causes the guru.

EDIT: This is not the reason.

[Ancalimon]

After reboot it crashed again after trying to assign a random qwerty:  and clicking cancel.

It seems like it only does not crash if I open mcpprefs once and save.

[Castellen]

No idea, but if it helps, attached is the MCP v1.39 configuration I've been using without problems for years with this A4000T/060.  Now with OS3.1.4, previously 3.9.

You'll need to rename it to MCP.config and copy it to ENVARC:MCP2/MCP.config
Obviously backup your existing config first.

I'm also running MCP from WBstartup.  Failing that, you could try disabing some of the non-standard stuff in startup-sequence to see if that makes a difference.

[Ancalimon]

No idea, but if it helps, attached is the MCP v1.39 configuration I've been using without problems for years with this A4000T/060.  Now with OS3.1.4, previously 3.9.

You'll need to rename it to MCP.config and copy it to ENVARC:MCP2/MCP.config
Obviously backup your existing config first.

I'm also running MCP from WBstartup.  Failing that, you could try disabing some of the non-standard stuff in startup-sequence to see if that makes a difference.

Thanks, I solved the problem by disabling a setting inside MCP but I don't remember which one. Probably assignwedge. I will check.

I already have reqchange installed so assignwedge functionality is already there.