Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: pneron on November 20, 2020, 01:28:14 AM

Title: HDToolBox - SCSI (refresh question)
Post by: pneron on November 20, 2020, 01:28:14 AM
Why under 3.1.4, when I click the HDToolBox, all my SCSI drives are grey out?  Do I still need to use the original Blizzard 68060 SCSI tools to see and configure these drives?

Thanks
Title: Re: HDToolBox - SCSI (refresh question)
Post by: Thomas on November 20, 2020, 10:52:34 AM

Put

SCSI_DEVICE_NAME=2060scsi.device

into the tooltypes. You always had to do this for third-party controllers.
Title: Re: HDToolBox - SCSI (refresh question)
Post by: pneron on November 20, 2020, 12:41:27 PM
thank you Thomas
Title: Re: HDToolBox - SCSI (refresh question)
Post by: pneron on November 23, 2020, 03:42:34 PM
Thanks again Thomas, do I also need to complete the other field types as well? I have ~ 7 SCSI devices (see attachments).
Title: Re: HDToolBox - SCSI (refresh question)
Post by: Thomas on November 23, 2020, 10:23:32 PM
I have ~ 7 SCSI devices (see attachments).

But not on the 2060 SCSI bus I guess.

HDToolbox scans only one driver at a time. You have to change the SCSI_DEVICE_NAME for each controller you want to scan for devices.