Welcome, Guest. Please login or register.

Author Topic: LoadWb  (Read 2223 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline MikeA3000Topic starter

  • Newbie
  • *
  • Join Date: Dec 2018
  • Posts: 8
  • Country: 00
    • Show only replies by MikeA3000
LoadWb
« on: January 16, 2019, 11:23:11 PM »
I have a question when booting my Amiga 3000 with 3.14 roms installed, when I hold down both mouse buttons and boot with no startup-sequence and then run LoadWB I get the prompt
to please insert volume ENV in any drive and the same with insert HELP. Is this normal I don't remember seeing this before since ENV is created in the startup-sequence?
Thanks,
Mike
Amiga 3000 16Mhz NTSC
2MB Chip - 16Mb Fast
Cybervision64 RTG -Picasso96 driver
3.14 Roms installed
 

Offline Munchkin

  • Sr. Member
  • ****
  • Join Date: Mar 2002
  • Posts: 287
    • Show only replies by Munchkin
    • http://www.sjolin.eu
Re: LoadWb
« Reply #1 on: January 17, 2019, 01:38:03 AM »
That's why, LoadWB just loads WB, it doesn't execute the Startup-Sequence
 

Offline MikeA3000Topic starter

  • Newbie
  • *
  • Join Date: Dec 2018
  • Posts: 8
  • Country: 00
    • Show only replies by MikeA3000
Re: LoadWb
« Reply #2 on: January 17, 2019, 01:50:04 AM »
I understand that but why is it asking for these volumes, is that normal?
Sorry been out of the Amiga for the last 20 years trying to get back into it with my hardware.
To me ENV should not be being prompted for when not using startup-sequence. So what is wanting the volume ENV and HELP?
Amiga 3000 16Mhz NTSC
2MB Chip - 16Mb Fast
Cybervision64 RTG -Picasso96 driver
3.14 Roms installed
 

Offline NinjaCyborg

Re: LoadWb
« Reply #3 on: January 17, 2019, 09:13:35 AM »
ENV is a mandatory volume, IPrefs will ask for it if nothing else does sooner. HELP will be looked for the first time any amigaguide library/datatype calls are made, or when the workbench loads.
 

Offline MikeA3000Topic starter

  • Newbie
  • *
  • Join Date: Dec 2018
  • Posts: 8
  • Country: 00
    • Show only replies by MikeA3000
Re: LoadWb
« Reply #4 on: January 17, 2019, 02:24:22 PM »
Thanks for clearing that up and explaining it NinjaCyborg!
Amiga 3000 16Mhz NTSC
2MB Chip - 16Mb Fast
Cybervision64 RTG -Picasso96 driver
3.14 Roms installed
 

Offline NinjaCyborg

Re: LoadWb
« Reply #5 on: January 17, 2019, 05:25:23 PM »
What you've learned is, there's a minimum amount of stuff in startup sequence required before you can run loadwb. So if you boot with no startup then need to open the workbench, you had better run startup-sequence in its entirety, or make an edited down version if you know exactly which bits you do and don't need.
 
The following users thanked this post: MikeA3000