New DVI A1200 Back plate for use with Indivision 1200Mk2cr

[amigakit]

We have designed a new custom back plate for use with the Amiga 1200 and Indivision 1200Mk2cr.  Production is now complete and the back plate is now available from AmigaKit.com



It fits into the rear trapdoor below the floppy disk drive and secures the DVI connector from the Indivision 1200Mk2cr



UK Product Link:
http://amigakit.leamancomputing.com/catalog/product_info.php?products_id=1206

Europe Product Link:
http://amigakit.leamancomputing.com/catalog/EUR.php?url=product_info.php?products_id=1206

USA Product Link:
http://www.amigakit.us/product_info.php?products_id=1206

Canada Product Link:
http://amigakit.leamancomputing.com/catalog/CAD.php?url=product_info.php?products_id=1206

[som99]

Thank you, I just ordered one for my Indivision AGA Had to make a new account since my old at Amigakit used a email that is no longer available since it was a ISP email and I do not have that ISP anymore.

Also I bought a Sam440ep-flex from a friend some time back, could it be possible for me to order a I/O backplate for it since im missing mine even if I didn't buy the motherboard from you guys?

[eroom]

Nice.  Ive already made a bracket for my Indivision but for how much these cost ive added one to an order I made earlier today, now whens the Prisma going to be available I'm checking the site everyday waiting to click that buy button :-)

[nyteschayde]

Is this a 3D printed piece? Can you provide the 3D file? The reason I ask is that I'd like to also add two vertically standing USB ports that are compatible with the subway. To do this requires moving the DVI port to the right or left a little bit.

[ddniUK]

No it looks to be thermo shaped plastic. It is too smooth to be 3d printed.

[LoadWB]

My back-door area is used by my Blizzard SCSI.  I still have to figure out where I will put the DVI connector of my yet-to-have Indi AGA Mk2.

[jj]

My back-door area is used by my Blizzard SCSI.  I still have to figure out where I will put the DVI connector of my yet-to-have Indi AGA Mk2.

That sounds quite painful. Wouldn't like to put any Amiga hardware in my back door area. Too many sharp edges

[stefcep2]

That sounds quite painful. Wouldn't like to put any Amiga hardware in my back door area. Too many sharp edges

Don't knock it till you've tried it.

[som99]

Fits good, here is a picture of it installed No problem to use for the Indivision AGA MK2 non CR version.

[omnicron10]

I have an STL file for the A1200 DVI port for the back plate.  I dont have an A1200 so I am not quite sure of the fitment so YMMV.