« Reply #11 on: May 28, 2013, 12:55:14 AM »
So, how is this new DVI connector mounted to the case, then? Please don't say "not at all"!
I guess you'll have to dremel a hole to match the DVI connector in the small cover on the back of the A1200 Desktop and a couple of small holes to secure the connector with the cover screws. Or, drill a couple of small holes in the bottom of the case on either side of the connector and use a couple tie wraps. I rather liked the DVI connector circuit board cause there was a hole in it for a securing nut & bolt that matched an existing recessed hole in the desktop case bottom that worked perfect.
I also noticed that most all websites that sell the Indie AGA have been updated with the new model but, isn't the Vesalia site
http://www.vesalia.de/e_indivisionagamk2.htm a direct contradiction with the new model NOT working with the 4000T? As opposed to what Jens says here...
http://eab.abime.net/showpost.php?p=890902&postcount=2216
Logged
A500: 2MB Chip, 8MB Fast, IndiECS, MiniMegi, IDE4ZorroII on Z-500, KS1.3/KS3.1, WB3.1&BWB
A2000HD: 2MB Chip, 128MB Fast, P5:Blizz 2060@50MHz, PCD-50B/4GBCF, XSurf100, RapidRoad, IndiECS, Matze RTG, MiniMegi, CD-RW, SunRize AD516, WB3.9
A1200: 2MB Chip, 64MB Fast, 4GBCF, GVP Typhoon 030 @40MHz w/FPU, Subway USB, EasyNet Ethernet, Indi AGA MKI, FastATA MK-IV, Internal Slim CD/DVD-RW, WB3.5
Surfing The Web With AMIGA Is Fun Again!