Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: A4060DT failure ;(  (Read 291 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline MacabreTopic starter

  • Newbie
  • *
  • Join Date: Mar 2006
  • Posts: 30
    • Show only replies by Macabre
A4060DT failure ;(
« on: January 09, 2015, 12:25:51 AM »
Hi,

My A4060 failed to day ;(.

I allready checked if everything is seated wel (ram, cpu) tried without ram etc.
My A4000 (tower) is working properly, it boots normal with the 030...

I'm looking for someone who can (help me) fix this !
Logged
A4000T, 060@50mhz,36Gb scsi, 128 mb fast cvs64-3d, inidivision, x-surf, deneb usb. Gotek
A1200, 030@40Mhz, 16gb CF, 128 mb fast, ethernet, indivision, RapidRoad
A500, 2,5mb fast, 512kb chip, a590 + 8gb SD (scsi2micro-sd) and internal gotek
 

Offline danbeaver

Re: A4060DT failure ;(
« Reply #1 on: January 09, 2015, 12:40:11 AM »
I ask Stachu (Stan Sedlak) in Poland to repair my CyberStorm Accelerators; he is on the Amibay forums and his private email I will PM to you.
Logged
 

Offline MacabreTopic starter

  • Newbie
  • *
  • Join Date: Mar 2006
  • Posts: 30
    • Show only replies by Macabre
Re: A4060DT failure ;(
« Reply #2 on: January 22, 2015, 10:08:13 PM »
Thanks for the tip, unfortunately he couldn't help because most logic is in programmable chips. But it's always good to now that there are people willing to help ;)

But I found someone who gave it a try, and its fixed ;)

At first it looked like one altera chip was defective because it was getting hot. But it turned out it was something else causing this.

So now my a4000 is running with this board again instead of my original 030 cpu card ;)
Logged
A4000T, 060@50mhz,36Gb scsi, 128 mb fast cvs64-3d, inidivision, x-surf, deneb usb. Gotek
A1200, 030@40Mhz, 16gb CF, 128 mb fast, ethernet, indivision, RapidRoad
A500, 2,5mb fast, 512kb chip, a590 + 8gb SD (scsi2micro-sd) and internal gotek
 
Pages: [1]   Go Up
« previous next »