Welcome, Guest. Please login or register.

Author Topic: Uae  (Read 679 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline cpaek72Topic starter

  • Jr. Member
  • **
  • Join Date: Mar 2012
  • Posts: 57
Uae
« on: July 27, 2017, 05:51:59 PM »
Guys, I'm running RuninUAE on my x5000 and I'm looking at my E-UAE settings, specifically .uaerc, and I'm trying to get a classic scanline look that looks much better than the standard scanlines option you get by adding gfx_linemode=scanlines.

The scanlines are way to obvious in this default mode and dims the entire picture. With them off, it's way too blocky. Anybody know if there is a custom config that can give you the classic crt look without it looking terrible? I use retroarch on the pc and it has amazing crt filters to make it look almost exactly like my old amiga monitor. Not sure if UAE has any custom filters for os4.1. Thanks for the help.


# Example UAE configuration
#
# Lines beginning with a '#' are comments

# Path to file containing Kickstart ROM image
kickstart_rom_file=kick1.3.rom

# If you have an encrypted ROM image from Amiga forever,
# this is a path to the key file
kickstart_key_file=rom.key

# Default path where floppy disk images may be found
amiga.floppy_path=PROGDIR:Floppies

#Show status LEDs on emulator screen
show_leds=true

# Enable floppy drives 2 & 3
floppy2type=0
floppy3type=0

# Speed of floppy drives; 100 is normal speed (most compatible), 800 is fastest speed (least compatible)
floppy_speed=100

# Joystick port emulation; none, mouse, joy0, joy1, kbd1, kbd2, kbd3
joyport0=mouse
joyport1=kbd2

# CPU type to emulate
cpu_type=68000
# CPU compatibility (true is slower)
cpu_compatible=false
cpu_cycle_exact=false
# CPU emulation speed
# real = approx A500 speed. max = CPU emulation will run as fast as it can
cpu_speed=real

# Amiga chipset to emulate
# Can be ocs, ecs or aga
chipset=ecs
immediate_blits=true
# Collision detection; none, sprites, playfields, full
collision_level=playfields

# Amount of chip memory to emulate
# in multiples of 512K. Thus chipmem=4 is 2MB
chipmem_size=2
bogomem_size=0

# Amount of fast memory to emulate in MB
fastmem_size=0

# Sound output; none, interrupts, normal, exact
sound_output=normal

# Sound channels; mono, stereo, mixed
sound_channels=mono

# Frequency of emulated sound output in Hz
sound_frequency=44100

# Sound buffer size; max_buffer is in bytes (obsolete), latency is in ms
sound_latency=120
sound_max_buff=8192

# Prompt for screen mode to use; public, custom, ask
amiga.screen_type=custom
amiga.publicscreen=

gfx_fullscreen_amiga=true

# Don't dither
amiga.use_dither=false

# Set frame skipping (1=show all frames, 2=show every 2nd frame, 3=show every 3rd frame, etc)
gfx_framerate=1

# Display settings
gfx_width_windowed=640
gfx_height_windowed=480
gfx_lores=false
gfx_linemode=scanlines
gfx_correct_aspect=no
gfx_center_horizontal=smart
gfx_center_vertical=smart

# Miscellaneous
use_debugger=no
ppc.use_tbc=false

# Full floppy drive noises
floppy0sound=1

# Additional settings
#RUNINUAE: SCREENMODE=ScreenMode_HiRes.prefs