Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Help CyberstormPPC wrong LUN number  (Read 503 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline AncalimonTopic starter

  • Hero Member
  • *****
  • Join Date: Apr 2002
  • Posts: 520
  • Country: 00
    • Show only replies by Ancalimon
    • http://www.myspace.com/orhunmusic
Help CyberstormPPC wrong LUN number
« on: June 30, 2020, 09:08:26 AM »
I have two Acard SCSI converters. One is 7720UW for IDE drives and the other is 7730A for SATA drives. I have OS4.1 installed on the IDE drive.

When I press esc to enter scsi menu of CyberstormPPC, I set the number of LUNS for the SATA drive on unit 10 to 1 but MediaToolbox displays all 8 LUNS for the SATA drive under OS4.1 FE. Is there anything I can do to correct this?
Logged
A4000T, 604e@400&060@66, 128MB+16MB+Zorram256, CVisionPPC, VLabMotion, Toccata, XSurf100&RapidRoad, Prisma Megamix

A1200, Blizzard060@50, 256MB, Blizzard IV SCSI, FastATA mk4
 

Online Thomas

Re: Help CyberstormPPC wrong LUN number
« Reply #1 on: June 30, 2020, 10:06:49 AM »

All I can say is that the Esc menu does not affect OS4.

I think there is a config file in the Kickstart directory which you can use to configure cybppc.device for OS4. Check the Documentation directory for details.
Logged
 
Pages: [1]   Go Up
« previous next »