Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: Nicole Judith Ridgway on October 08, 2020, 06:48:04 PM
-
My A600 has always had this "shaking" problem.
It happened back in the days when I used my A600 with KS 2.05 and HDD,
and it happens nowadays with a Vampire and a 1mb ChipRAM installed.
My A600 was recapped some years ago but again...It also happened 25 years ago.
Has anyone ever had this kind of problem? Please let me know.
https://youtu.be/2D3Q8ZsnyrI
-
You might want to add more informations, like which video output you use, or the details how the shaky picture looks like
, or even a video? :D
Ok, did see the clip.
Is it only with this game?
-
[Ian Stedman's mod] RGB Scart. But it happened also when I had RF out, and also with composite.
It happens also with other games (original and cr4ck3d)
-
And with Workbench too?
-
I will try as soon as I can.
If I remeber well it didn't do that.
-
Maybe try swapping out your Denise chip to narrow it down. Or it could be an Angus copper problem. The Workbench question is a good one as that will isolate a timing sync problem.