Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: Drummerboy on May 18, 2011, 07:23:43 AM
-
Hello,
Anybody know wich kind of Crystal Ocillator will work for M12330XA Accelerator Card Overclocking to 50MHZ.
Some of these work?
http://amigakit.leamancomputing.com/catalog/index.php?cPath=45 (http://amigakit.leamancomputing.com/catalog/index.php?cPath=45)
Wich kind of ocillator uses this card 8 pin or 14 pin.
If anybody know, please let me know
thanks
Regards.
-
Hi,
Yes, it's the 14 pin size.
Hello,
Anybody know wich kind of Crystal Ocillator will work for M12330XA Accelerator Card Overclocking to 50MHZ.
Some of these work?
http://amigakit.leamancomputing.com/catalog/index.php?cPath=45 (http://amigakit.leamancomputing.com/catalog/index.php?cPath=45)
Wich kind of ocillator uses this card 8 pin or 14 pin.
If anybody know, please let me know
thanks
Regards.
-
Hi,
Yes, it's the 14 pin size.
Ok,
Thanks dude,
You know if It is need to change the 2 Ocillator or just the CPU Ocillator?
-
Hi,
I have the same card in my 1200. You only need one Crystal if your running them at the same speed (but you need to change a jumper). If I remember correctly, the manual for this card says "don't overclock the math chip, not even a little bit". I changed mine from 33 to 50 mHz, but I swaped the CPU and math chip to a 50mHz rated model.
Len
Ok,
Thanks dude,
You know if It is need to change the 2 Ocillator or just the CPU Ocillator?
-
Hi,
I have the same card in my 1200. You only need one Crystal if your running them at the same speed (but you need to change a jumper). If I remember correctly, the manual for this card says "don't overclock the math chip, not even a little bit". I changed mine from 33 to 50 mHz, but I swaped the CPU and math chip to a 50mHz rated model.
Len
Ok,
Thanks men for you comments and suggests..